gasket tickness
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Blue Country
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
gasket tickness
hi guys,
need some help from HT's, my setup
GSR 84mm ERL
CP piston 9.7
Manley TT
GSR crank
ACL race series
crower valvespring and retainer
supertech valve flat face
ITR cam
cometic standard thickness gasket
*standard head no skim*
my concern is piston slapping, am i going to fine with the gasket for boost at 30psi?
need some help from HT's, my setup
GSR 84mm ERL
CP piston 9.7
Manley TT
GSR crank
ACL race series
crower valvespring and retainer
supertech valve flat face
ITR cam
cometic standard thickness gasket
*standard head no skim*
my concern is piston slapping, am i going to fine with the gasket for boost at 30psi?
#2
Honda-Tech Member
Join Date: Sep 2006
Location: SHIRLEY, N.Y., U.S.
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Re: gasket tickness
you should be fine but if it will make you sleep better go with a .o35
Last edited by TEAM ASSASSIN SI; 04-11-2010 at 08:12 PM. Reason: correction
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Blue Country
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
97CTR
All Motor / Naturally Aspirated
4
04-27-2009 06:26 PM