Full-Race Geoff

we just finished testing some new cams on my car this past week. The results were very favorable, as the cams made 10-15 whp from 2000rpm to 5000 rpm and 60-100 whp from 5000 rpm to redline. This was compared to a 2001 ITR cam (aka CTR)



These cams MUST be used with a good valve spring (at least 100+ lb seat pressure, this is considered mandatory) and we recommend that you use stock valve size.

price is $540



Modified by Full-Race Geoff at 2:26 PM 3/22/2006

SL0WEGG

damn!!!

b16hybridsol

let me guess, b-series only

Dunc

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16hybridsol &raquo;</TD></TR><TR><TD CLASS="quote">let me guess, b-series only</TD></TR></TABLE>
Why would you use anything other that B-series? ....You mean people actually use D's???? haha

price?

LL2009

$

LostSolVTEC

intersting

b16hybridsol

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dunc &raquo;</TD></TR><TR><TD CLASS="quote">
Why would you use anything other that B-series? ....You mean people actually use D's???? haha

price? </TD></TR></TABLE>

h-series market lacks hella for cams

ValleySyder

what the spec .. profile graph available ?

95GSRTT

those cams are compared to what?

LostSolVTEC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95GSRTT &raquo;</TD></TR><TR><TD CLASS="quote">those cams are compared to what?</TD></TR></TABLE>
I'd assume the Type R cams he had in his car before...but i'm not sure

Full-Race Geoff

sorry, i forgot to note this was compared to a set of 2001 ITR/CTR cams.

the price will be 540


Modified by Full-Race Geoff at 2:24 PM 3/22/2006

sp00led

sick numbers $650

blundar

Fingers crossed, I'll be doing a GSR vs. ITR vs. Blox B dyno on one of our shop motors within the month or so. (I at least want to do GSR vs. Blox B) I'm curious to see how thes results would compare to your cam, and also to other "medium" (it's no stage 1...) NA cams like the Blox B (Skunk2 Stage 2), M22, BC3/BC4, etc.

I'm not surprised you've come up with a better cam considering how much time you've spent on the dyno lately.

sivic_si

How long until these cams are for sale to the public?

I have a set of cams in my Talon and it made a world of difference. The lop is pretty cool also. How are the cams idle characteristics? But hell if they gain the amount of hp you show on your graph then $650 sounds like a hell of a deal.

I just might need some,
Josh

Tad

sohc variant??

Muckman

iTrader: (2)

Was this tested on a stock head?
Why is stock valve size recommended?
Did you see adverse results with oversized valves?

Full-Race Geoff

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sivic_si &raquo;</TD></TR><TR><TD CLASS="quote">How long until these cams are for sale to the public?</TD></TR></TABLE>

we have a few sets in stock now. they idle almost as well as stock

Full-Race Geoff

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Muckman &raquo;</TD></TR><TR><TD CLASS="quote">Was this tested on a stock head?
Why is stock valve size recommended?
Did you see adverse results with oversized valves?
</TD></TR></TABLE>

tested on a ported head. stock valve size is recommended for reduced mass and increased clearance.

the adverse results we saw with oversized valves and too soft springs was bending the 1mm over ferrea exh valve at 10,500 rpm . "oops you have the 90 lb valve springs that were discontinued last year"

Smokinsax

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Full-Race Geoff &raquo;</TD></TR><TR><TD CLASS="quote"> "oops you have the valve springs that were discontinued last year"
</TD></TR></TABLE>

K20 SDN

Guys its true they work like a dream

I hear that they are selling like a MotherF@#$

Jump on it before its all gone

seen4ever

so what about a .5mm oversized supertech valve? its not quite 1mm over? anyone know the specs of the supertech spring. I swore they were 130lb pressure, but now I have to wonder and my stake of receipts is like reading the bible anymore with the number of times i've rebuilt my hatch.

regardless..this cam looks amazing, what turbo setup was this done on? doesn't look like a gt40 powerband.

tegedrex

Where there any adustmentsto the cam gears?

sp00led

I think Geoff uses a gt35 of some sort. I would like to see results on a smaller turbo. Possibly a gt3076r since I have one on backorder from FR.

WillieWillieFast

Nice numbers . One of these days I will have to get rid of my stock cams.

Justin Olson

Thats a GT4088R