Full Race connecting rods...who's using them???
07-16-2005, 02:01 AM
#1
Thread Starter
Join Date: Jan 2003
Location: Redmond, WA, U.S.A.
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Full Race connecting rods...who's using them???
Did a search and didnt find anything. Just curious as to who was running them in their setup and what their opinion of the rods were??
07-16-2005, 03:41 AM
#3
Honda-Tech Member
Join Date: Jan 2005
Location: Wa
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Re: (lucidvtec)
Full-Race rods are made by manley. They are very strong and there a number of people make a lot of power on them. I'm pretty sure Geoff is running them in his motor 
and he's put down over 700. Just remember to correctly stretch and torque your rod bolts. If you dont do that right you might as well run stock rods.
and he's put down over 700. Just remember to correctly stretch and torque your rod bolts. If you dont do that right you might as well run stock rods.
07-16-2005, 05:34 AM
#4
Honda-Tech Member
Re: (SlowReaction)
Manley rods are the best rods you can buy. Just ask Gary Gardella who's rod he's using. And he makes in excess of 1000fwhp with an off the shelf rod. Manley-FullRace 
07-16-2005, 07:33 AM
#6
Honda-Tech Member
Re: (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">Chuck Seitsinger runs Manley rods too, and he's making a bit over 500hp 
</TD></TR></TABLE>
lol. id say a bit over 850..
on the techinical side ofthings ..
the manley/full race rods. are 40 grams heavier than crowers, so they have a bit more material on them, and should hold up a bit better.
</TD></TR></TABLE> lol. id say a bit over 850..
on the techinical side ofthings ..
the manley/full race rods. are 40 grams heavier than crowers, so they have a bit more material on them, and should hold up a bit better.
Trending Topics
07-16-2005, 08:04 AM
#8
Honda-Tech Member
Join Date: Mar 2003
Location: TX
Posts: 4,151
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full Race connecting rods...who's using them??? (B18C1CYA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C1CYA »</TD></TR><TR><TD CLASS="quote">i run them </TD></TR></TABLE>
</TD></TR></TABLE>
07-16-2005, 08:29 AM
#9
New User
Join Date: Mar 2001
Posts: 12,296
Likes: 0
Received 0 Likes
on
0 Posts
I am running them in my new B18C motor, should make over 750whp and I have no WORRIES at all on them. I am a Full race dealer too so if interested let me know. Again they are made by Manley and used by some of the HIGHEST HORSEPOWER Hondas out there and also come FACTORY EQUIPMENT on cars likethe 03-04 Mustang Cobras and also in alot of Tuner cars!
07-16-2005, 05:32 PM
#11
Thread Starter
Join Date: Jan 2003
Location: Redmond, WA, U.S.A.
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SuperTeg95)
Yeah, I know the Full Race is a great company, its just that I haven't seen many people on here use them, cept maybe the Full Race guys lol...but if they're made by Manley then
Thread
Thread Starter
Forum
Replies
Last Post
GOLDBERG
All Motor / Naturally Aspirated
9
10-12-2003 09:52 AM
