Five-O Motorsports Fuel Injectors?
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Five-O Motorsports Fuel Injectors?
Just curious if anyone has had any good/Bad experience with them? The info on the web page seems legit and the quality of the injectors looks up to par, all the sets come with the pig tails and aluminum adaptors for the new EV14 style injectors.. I have been searching and digging and still have yet to find any good Info or reviews of them. Has anyone tuned a car with these Injectors or have had their car tuned on a set from this Business? Below is the picture of the injectors I was looking at. they are a bored out Ford Denso Injector they now flow at 1600cc and come with a folw chart. Let me hear some input.
http://www.fiveomotorsport.com/
http://www.fiveomotorsport.com/
#3
Moderator in Chief
iTrader: (2)
Re: Five-O Motorsports Fuel Injectors?
I use their 1600cc injector with E85. I have no complaints.
https://honda-tech.com/forums/forced-induction-16/fiveomotorsports-2000cc-vs-bosch-1600cc-injectors-2760438/
https://honda-tech.com/forums/forced-induction-16/fiveomotorsports-2000cc-vs-bosch-1600cc-injectors-2760438/
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Re: Five-O Motorsports Fuel Injectors?
I use their 1600cc injector with E85. I have no complaints.
https://honda-tech.com/forums/showthread.php?t=2760438
https://honda-tech.com/forums/showthread.php?t=2760438
Thank you both for your replys.
#7
Honda-Tech Member
Thread Starter
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Re: Five-O Motorsports Fuel Injectors?
Sorry for commenting on old thread, wanted to warn people off this company. Bought some Subaru side-feed injectors from them that have been nothing but heartache. They came pretty fast and initially looked really good. However after getting them installed the car barely ran with most of the cylinders misfiring. Checking for 'clicking' with an automotive stethoscope and they were all pretty erratic. Pulled them out and requested a refund only to find out that my discovering that they sent me defective goods voids the warranty. I could pay to have the repaired or get a new set at a discount. Tried to get it through paypal, and initially when I sent them in they said in writing they looked, and ran fine. Then when paypal was leaning in my favor they said the injectors came back wrecked (despite having in writing the injects were 'tested' and ran fine!).
Don't buy from these guys, they use scummy business practices.
Don't buy from these guys, they use scummy business practices.
#9
Honda-Tech Member
Re: Five-O Motorsports Fuel Injectors?
I run Injectors Dynamics; they are really good quality Injectors. I had mine serviced last week, and they came back good as new! I ran them for almost 9 years!!! on an original Honda fuel filter in my 1999 GSR with over 170k miles!!!
T1 development:
Attached to this email are the flow test results for the ID 1000's that were sent in to be cleaned and inspected. As you will see, they are still a relatively tight and linear matched set, with average deviation across the entire operating range coming in at only .74%
Although this is a tightly matched set, to insure that they stay this way, we suggest that the filter between the fuel pump and the fuel rail is a 6 micron at best, 10 micron at worst. We recommend our new ID F750 fuel filter,
What filter were you using before? Whichever it was seems to be working pretty good based on the results of your injectors.
With the injectors they are well within range, the deviation in the set is only at a .74% not 74% flow. Based on that we don't like our injectors to exceed a 3% deviation because that's when you start to run into issues with anything above 3%, so yes .74% is long range away from 3.00%
T1 development:
Attached to this email are the flow test results for the ID 1000's that were sent in to be cleaned and inspected. As you will see, they are still a relatively tight and linear matched set, with average deviation across the entire operating range coming in at only .74%
Although this is a tightly matched set, to insure that they stay this way, we suggest that the filter between the fuel pump and the fuel rail is a 6 micron at best, 10 micron at worst. We recommend our new ID F750 fuel filter,
What filter were you using before? Whichever it was seems to be working pretty good based on the results of your injectors.
With the injectors they are well within range, the deviation in the set is only at a .74% not 74% flow. Based on that we don't like our injectors to exceed a 3% deviation because that's when you start to run into issues with anything above 3%, so yes .74% is long range away from 3.00%
Thread
Thread Starter
Forum
Replies
Last Post