finally got my car boosted !
11-12-2004, 09:24 PM
#1
Thread Starter
Join Date: Jul 2004
Location: far far away
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
finally got my car boosted !
I got a 2000 SI with fully built motor: Wiseco pistons, eagle rods, all new bearings and seals,springs, retainers, tubular manifold, t3-t4 turbo, crane ignition, tial bov, tial w/g, 2.5" intercooler piping, 30x6x2 front mount, cartech fmu, energy mount inserts, vafc, ferrea stainless valves, exceedy stage 2 clutch. Right now just breaking in and cant wait for dyno, but so far its faster than I imagined.
11-12-2004, 09:35 PM
#4
Honda-Tech Member
Join Date: Sep 2001
Location: Texas
Posts: 1,104
Likes: 0
Received 0 Likes
on
0 Posts
Re: finally got my car boosted ! (DOHCarp)
Congrats!!
But let me be the first to say it. Ditch the fmu and Vafc. With the money you have invested in your motor set up, PLEASE get a real engine management. And PLEASE put the car on a dyno NOW to get the A/F right for the break-in period. I'm sure you dropped the compression which means your running a little rich. To rich and you could wash the rings. If you guess with the AFC, could go lean and ruin the pistons. just my $.02 of advice.
But let me be the first to say it. Ditch the fmu and Vafc. With the money you have invested in your motor set up, PLEASE get a real engine management. And PLEASE put the car on a dyno NOW to get the A/F right for the break-in period. I'm sure you dropped the compression which means your running a little rich. To rich and you could wash the rings. If you guess with the AFC, could go lean and ruin the pistons. just my $.02 of advice.
Thread
Thread Starter
Forum
Replies
Last Post
94vtecmn
All Motor / Naturally Aspirated
3
07-08-2003 11:39 AM