a few turbo questions
#1
Thread Starter
Join Date: Sep 2005
Location: st. joseph, mo, usa
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
a few turbo questions
im currently shopping around for a good turbo.. im going to be running an ls with rods/ pistons, mild headwork, probably turbo cams
im looking at maybe a holstet hy35/hx35, or even a hx30.
also looking at an sc61
does anybody have any real experience with either turbo? what could i look for as far as spool times on my ls?
im not going for full on drag car.. it will still be street driven... so a fairly quick spool time would be nice... id like to see full boost, approx 15 psi at around 4k if possible.. but id like to be able to hold that 15psi to as close to redline as possible...
so if anybody has a setup similar to what im considering running chime in... id like to hear your input.. or maybe some suggestions on a different turbo?... thanks in advance guys
im looking at maybe a holstet hy35/hx35, or even a hx30.
also looking at an sc61
does anybody have any real experience with either turbo? what could i look for as far as spool times on my ls?
im not going for full on drag car.. it will still be street driven... so a fairly quick spool time would be nice... id like to see full boost, approx 15 psi at around 4k if possible.. but id like to be able to hold that 15psi to as close to redline as possible...
so if anybody has a setup similar to what im considering running chime in... id like to hear your input.. or maybe some suggestions on a different turbo?... thanks in advance guys
#2
Honda-Tech Member
Join Date: Jun 2001
Location: San Antonio, TurboElements, TX, USA
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
Look at this thread: https://honda-tech.com/zerothread?id=1225182
I think you will find all your answers there.
I think you will find all your answers there.
Thread
Thread Starter
Forum
Replies
Last Post