few questions about engine rebuilding.
#1
Honda-Tech Member
Thread Starter
few questions about engine rebuilding.
hello everybody.
im building my b16a2 for high boost.
-what cranck bearings and thurst washers do you recommend ?
-do i get rod bolts with new eagle rods?
-do i get rod bearings with new rods?
THANKS
im building my b16a2 for high boost.
-what cranck bearings and thurst washers do you recommend ?
-do i get rod bolts with new eagle rods?
-do i get rod bearings with new rods?
THANKS
#3
Honda-Tech Member
Join Date: Aug 2004
Location: at 9k in the streets of gburg, MD, usa
Posts: 2,379
Likes: 0
Received 1 Like
on
1 Post
Re: few questions about engine rebuilding. (RACEPAK)
oem bearing are ur friend .... get a helm manual and torque each bolt at specific torque measure bearing clerance when ur building ur engine
yes u get rod bolts with ur new rods like eagle rods will come with 7/16 arp 2000 bolts
torque them to 43 tf.lbs not 75 tf lbs as show on the sheet that come with ur rods .
no u dont get rod bearing with ur new rods ...as I said oem will be ur best friend the bearing set runs for about 85 $ + shipping main bearing and rod bearings and the eagle I got mine frome iTunedusa for 290 $ shipped to my door
yes u get rod bolts with ur new rods like eagle rods will come with 7/16 arp 2000 bolts
torque them to 43 tf.lbs not 75 tf lbs as show on the sheet that come with ur rods .
no u dont get rod bearing with ur new rods ...as I said oem will be ur best friend the bearing set runs for about 85 $ + shipping main bearing and rod bearings and the eagle I got mine frome iTunedusa for 290 $ shipped to my door
Thread
Thread Starter
Forum
Replies
Last Post
RACEPAK
All Motor / Naturally Aspirated
1
10-12-2005 02:53 PM
Flamenco-T
Forced Induction
5
08-17-2002 11:52 PM