g2turbo

mamaboy

are those sparco speeds? how are they i'm planning to install two in my car, or i was planning to just get one evo.

J.R.

nice paint job

E Swift

Nice car but what's it doing outside covered in snow? That should be stored away until Spring.

GEN2TEG

Have you tuned it yet? What kind of power are you putting down?

Nice car, i have a g2 teggy myself nice to see there's some nice one's out there!


[Modified by GEN2TEG, 11:03 PM 2/27/2003]

Rah Rah

same here

PreIudeSI

get that car out of the snow! the paintjob is too nice to leave out like that. nice car.

civicdream

snow won't hurt it. it's the salt you have to worry about. just don't drive it.

tegasaurus

that is a nice car.

what kind of times are you running and what kind of cage is that (weld or bolt in)?

-Ryan

oneupster

Nice looking car.

What cage is that?

thanks

maxpsi

What is up with the oil feed line? Are you planning on thermo wrapping the rest of the exhaust? How do you like your TurboXS SBC?????

SIXTYdashONE

nice car man, i likes .i likes.

FFDragger

Nice car. Really like the cage. How the hell did you get that Tial to fit under the hood?

SweetChin

yeah where did you get that roll bar from...ive been looing for one like that...how much did it go for too???

SpoolinSol

He doesn't appear to be using the top fitting on the Tial... I believe that's what dent's most peoples hoods..

He has the Turbo XS manual boost control hooked in between the sideport of the wastegate and inline with the compressor.

maxpsi

I thought the top port was for the boost controller (at least that is what the Tial instructions say). SO for me to hook up my turboXS sbc I have to take the vacuum hose from the back of the intake mani and plug it into the SBC and then run the other vaccuun hose to the barb on the turbo itself??

qwkteg125

b16 block too = shorter deck height then ls/gsr block.

Kwuaymaikrup

g2turbo

hey thanks for the comments. The car hasnt been tuned yet. Hondata keeps getting pushed back from lack of funds.

The cage is custom done by a friend of mine. Its chromoly 6pt. all tig welded.
if you are local i can have a cage done for any of you guys.

$575 for a 6pt is not bad at all.

my oil feed line is like that cause it wasnt long enough(or at least i didnt think so to wrap around the side.

And i really hate having the car in the snow.

CHRIS

PM-Performance

dude that Da is sick . mad props dud e
still streetable ?
thats nutty that thing would make people **** thme selves if seeing that on the street.
Quick Da6 i think his name is has one kinda like that , but bottle fed and fully built. he has like an 8pt in it . . . very tight man .

illi Adik

maxpsi

If it is from the Drag kit, it will wrap around the distributor side. When I first got my Drag kit hooked up, I thought the same. Mine goes from the turbo, between the bottom of the distributor and top of the tranny, and under intake mani .

Tell me how you like your turboXS SBC and how you hooked it up with the Tial and all??


[Modified by maxpsi, 5:20 PM 2/28/2003]

g2turbo

Thanks for the info. i like the mbc. shoot me an email and ill tell ya how i set it up. Its been a while i need to look at it. but i like it.
CHRIS

BoostingSnail

yeah thats a hot setup you have there..personally I sweat the interior....make sure you post your hp and tq when ya get it tuned..Im sure everyone would like to know including myself.....I see your from Ohio....what events and such do you plan on attending this year?

Danger

very well done