Experience With Precision V-Band Inlet Exhaust Housings? High HP Users Step In!
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2008
Location: Chambersburg, PA, USA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Experience With Precision V-Band Inlet Exhaust Housings? High HP Users Step In!
Looking to hear from some of you who have experience with the PTE v-band inlet exhaust housings, especially those who are making a lot of power with these housings. Specifically, I have a 6766 with a ported H cover and the vband inlet/outlet .82 housing. The turbo will be mated to a synapse v-band outlet exhaust manifold. I am looking to make between 8 and 900whp with this combo and E-85, but have recently been wondering if this housing is going to be too restrictive. I am debating ditching this setup in favor of divided t4/Borg Warner FMW 67mm setup, but I wanted to see if anyone could give me some feedback.
I have seen several make over 900wheel with the 6766, but this is typically done on a larger t4 housing.
I have seen several make over 900wheel with the 6766, but this is typically done on a larger t4 housing.
Thread
Thread Starter
Forum
Replies
Last Post
tscook3
Drag Racing
10
08-12-2013 11:31 AM
street_ride14
Forced Induction
5
08-27-2011 09:34 AM
Chris F
Forced Induction
1
06-04-2005 08:17 PM