Exhaust Manifold Merge Collectors
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: FULL RACE, AZ, USA
Posts: 4,719
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Manifold Merge Collectors
For all those who want to see what the inside of our merge collectors look like, here are some pics:
http://www.full-race.com/collector
These do not count (sorry to those who have these style)
ps scott i couldnt remember your email addy, sorry.
oh one more thing, look at the thickness difference Other tubular manifolds are as thick as the stamped POS collector at the bottom.
[Modified by FFgeoff, 8:42 PM 9/13/2002]
http://www.full-race.com/collector
These do not count (sorry to those who have these style)
ps scott i couldnt remember your email addy, sorry.
oh one more thing, look at the thickness difference Other tubular manifolds are as thick as the stamped POS collector at the bottom.
[Modified by FFgeoff, 8:42 PM 9/13/2002]
#5
Honda-Tech Member
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust Manifold Merge Collectors (wickedxboi)
pardon me, is this the line where we kiss geoff's butt? J/K!
seriously geoff you do some nice work, i could only imagine what a dumtupe would look like
[Modified by lucas569, 3:22 AM 9/14/2002]
seriously geoff you do some nice work, i could only imagine what a dumtupe would look like
[Modified by lucas569, 3:22 AM 9/14/2002]
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: FULL RACE, AZ, USA
Posts: 4,719
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust Manifold Merge Collectors (Liltrix)
the manifolds are 975 until the end of september at that point they will go to 1099. If you are interested in just a collector, email me.
#10
Re: Exhaust Manifold Merge Collectors (FFgeoff)
Whats the price on just the collectors? I am sorry I have not been on HT for about 4 months, was too busy on the job, lots of sleepless nights and finally a vacation etc.
#11
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: FULL RACE, AZ, USA
Posts: 4,719
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust Manifold Merge Collectors (Liltrix)
I am very hesitant to sell just collectors, but if requested i will match Burns Stainless Steel price of 297. That does not mean i will definately sell them, but if i do decide to, thats the price. What is your application and why do you want just a collector
#12
Re: Exhaust Manifold Merge Collectors (FFgeoff)
Geoff,
I currently have a tubular manifold but it causes the turbo to sit too low and its not draining the oil properly, this caused my turbo to fail already, I just bought a new one and I must change the manifold before re-installing the turbo, your mani is beautiful but I cannot afford the almost $1k you are asking for yours. I am searching for a cheaper solution, something in the 350-400 dollar range. Any help will be appreciated. I looked at the SFP mani but I have heard things that are not too good about them. I actually saw one made for the Prelude and it looked really thin. Is the app for the GSR motor any better??
I nedd some feedback!
I currently have a tubular manifold but it causes the turbo to sit too low and its not draining the oil properly, this caused my turbo to fail already, I just bought a new one and I must change the manifold before re-installing the turbo, your mani is beautiful but I cannot afford the almost $1k you are asking for yours. I am searching for a cheaper solution, something in the 350-400 dollar range. Any help will be appreciated. I looked at the SFP mani but I have heard things that are not too good about them. I actually saw one made for the Prelude and it looked really thin. Is the app for the GSR motor any better??
I nedd some feedback!
#14
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: FULL RACE, AZ, USA
Posts: 4,719
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust Manifold Merge Collectors (Liltrix)
I have seen the sfp manifolds and have come away very disappointed. I think more highly of the revhard manifolds for that price range. I dont think anyone has had a chance to see virens manifolds yet but you may want to check into them.
I am hesitant to recommend a tubular manifold for that price range, i feel that it will have too many cut corners and have a high risk of cracking. The mild steel revhard is the exception. Also i do like the inline manifold but what disappoints me is that i feel they duplicated revhard's manifold and there is no excuse for duplication without innovation, and the fact that they are represented quite poorly on this board (jinxproof is the only one with any etiquette) does not help.
why not modify your existing manifold to make it work better? Send me some pics of it, i dont see why it wouldnt be possible?
I am hesitant to recommend a tubular manifold for that price range, i feel that it will have too many cut corners and have a high risk of cracking. The mild steel revhard is the exception. Also i do like the inline manifold but what disappoints me is that i feel they duplicated revhard's manifold and there is no excuse for duplication without innovation, and the fact that they are represented quite poorly on this board (jinxproof is the only one with any etiquette) does not help.
why not modify your existing manifold to make it work better? Send me some pics of it, i dont see why it wouldnt be possible?
Thread
Thread Starter
Forum
Replies
Last Post