dynoed boosted h22, clutch slipping
#1
dynoed boosted h22, clutch slipping
a friend of mine went to the dyno today w, his new setup only to have the clutch give out just over 6k rpm. up to that point it put down 250 whp, 215 wtq on 8 psi.
currently running a comp clutch stg. 3.
just wondering what clutch anyone w/ a similar setup is using?
currently running a comp clutch stg. 3.
just wondering what clutch anyone w/ a similar setup is using?
#2
Junior Member
Join Date: Feb 2003
Location: Grand Cayman, Cayman Islands
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
Re: dynoed boosted h22, clutch slipping (Missing Gears)
i'm using an action 2md on my h22a, running 9psi on an sc44, havent dynoed yet, but the car pulls hard as hell. i'm sure its around 300. clutch is holding up fine so far. and feels great engaging
#3
Honda-Tech Member
Join Date: Apr 2004
Location: Belleville, Il, US
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Re: dynoed boosted h22, clutch slipping (Missing Gears)
I'm running the street/strip act clutch and the regular pressure plate. I made 336hp/256tq on a touch over 8psi and it has been holding on strong for around 7 months turboed. It was on their n/a for 2+ years! Will be using their six puck and hd pressure plate abter sleeving! ACT gets my vote!
#5
Re: dynoed boosted h22, clutch slipping (Missing Gears)
I had that same problem with there stage 4 clutch and it was slipping at 350, just run A ACT xtreme unless he has twin disk money.
Trending Topics
#8
Re: (2point2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2point2 »</TD></TR><TR><TD CLASS="quote">sooo, you turbocharged a car that went mid 11's all motor? </TD></TR></TABLE>
no, this is a friends car.
no, this is a friends car.
#9
Junior Member
Join Date: Feb 2003
Location: Grand Cayman, Cayman Islands
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
Re: dynoed boosted h22, clutch slipping (Truman001)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Truman001 »</TD></TR><TR><TD CLASS="quote">I'm running the street/strip act clutch and the regular pressure plate. I made 336hp/256tq on a touch over 8psi and it has been holding on strong for around 7 months turboed. It was on their n/a for 2+ years! Will be using their six puck and hd pressure plate abter sleeving! ACT gets my vote! </TD></TR></TABLE>
those are good numbers bro, whats turbo you using?
those are good numbers bro, whats turbo you using?
#10
Honda-Tech Member
Join Date: Nov 2003
Location: Kitchener, Ontario, CANADA
Posts: 5,986
Likes: 0
Received 2 Likes
on
2 Posts
Re: (Missing Gears)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Missing Gears »</TD></TR><TR><TD CLASS="quote">no, this is a friends car.</TD></TR></TABLE>
lol, i have a bad habbit of reading only numbers..
on both setups.
lol, i have a bad habbit of reading only numbers..
on both setups.
Thread
Thread Starter
Forum
Replies
Last Post
PrecisionH23a
Forced Induction
14
06-27-2004 01:40 AM