Dyno Tuning Day in Mobile Alabama.....need some input/interest?
03-24-2006, 09:38 AM
#1
Honda-Tech Member
Thread Starter
Dyno Tuning Day in Mobile Alabama.....need some input/interest?
We will be hosting a tuning session and dyno day in Mobile Alabama, the weekend of March 31st and April 1st. we will be offering street tuning and dyno tuning. Myself and JKOBD will be on hand for tuning as well as help with vehicles and just plain ole good advice
The dyno being utilzed should be Profesional Engine Service in Mobile. We can reserve the dyno for the whole day and of course get a little better deal if we book it in advance, and the more people the lower the cost
Tuning platforms are but NOT limited to, AEM, Crome and Crome-pro, Hondata S200 & 300, Kpro, and more. we will also have chipped ecus on site if you need one, along with some conversion harnesses if you need to convert.
The meeting point will be my work (V&T Performance) in Mobile
i am posting this here because there are a few other board members from the local area who may not see this on other boards
The dyno being utilzed should be Profesional Engine Service in Mobile. We can reserve the dyno for the whole day and of course get a little better deal if we book it in advance, and the more people the lower the cost
Tuning platforms are but NOT limited to, AEM, Crome and Crome-pro, Hondata S200 & 300, Kpro, and more. we will also have chipped ecus on site if you need one, along with some conversion harnesses if you need to convert.
The meeting point will be my work (V&T Performance) in Mobile
i am posting this here because there are a few other board members from the local area who may not see this on other boards
03-24-2006, 12:44 PM
#2
Honda-Tech Member
Join Date: May 2004
Location: Chattanooga, TN
Posts: 2,853
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (mrbsponge)
you live in the area or just visiting? i wont be ready anytime near april 1st haha
03-24-2006, 01:37 PM
#3
Honda-Tech Member
Thread Starter
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (dornon13)
i live in Mobile, and work at V&T performance
bump for any others
bump for any others
03-24-2006, 06:07 PM
#4
Honda-Tech Member
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (mrbsponge)
Street tuning will be done on Friday March 31st. So far there are two cars set to street tune on Friday. I would like to keep this to no more than six cars that day.
03-25-2006, 03:47 PM
#6
Member
Join Date: Feb 2003
Location: fort walton beach, fl, usa
Posts: 1,232
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (Blown90hatcH)
one would be mine.... i picked up an s300 yesterday so wont be running crome anymore.... only deal is i dont have my ecu chipped yet for it... Anybody wanna trade a chipped ecu for a ecu chipped for my s300?
Modified by zeroice at 2:11 AM 3/26/2006
Modified by zeroice at 2:11 AM 3/26/2006
03-25-2006, 03:50 PM
#7
Honda-Tech Member
Thread Starter
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (zeroice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zeroice »</TD></TR><TR><TD CLASS="quote">one could is mine.... i picked up an s300 yesterday so wont be running crome anymore.... only deal is i dont have my ecu chipped yet for it... Anybody wanna trade a chipped ecu for a ecu chipped for my s300?</TD></TR></TABLE>
we have everything to chip ecus for s300's as well brutha
Modified by mrbsponge at 11:30 PM 3/28/2006
we have everything to chip ecus for s300's as well brutha
Modified by mrbsponge at 11:30 PM 3/28/2006
Trending Topics
03-26-2006, 08:04 AM
#8
Honda-Tech Member
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (zeroice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zeroice »</TD></TR><TR><TD CLASS="quote">one would be mine.... i picked up an s300 yesterday so wont be running crome anymore.... only deal is i dont have my ecu chipped yet for it... Anybody wanna trade a chipped ecu for a ecu chipped for my s300?</TD></TR></TABLE>
Yep, you are one of them.
Yep, you are one of them.
03-26-2006, 10:50 AM
#10
Join Date: Feb 2005
Location: AL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (mrbsponge)
hi,
my setup is done, just waiting for tuning. i dont know much about the kpro however. i was hoping that Mase would head back to AL some time soon, but as busy as he is, im not sure when that will be.
how much would u guys charge just for a partial throttle tune? so i can atleast drive it while I figure out who is going to complete the tune.
setup is a built type s gt35r 1000cc injectors etc.
my setup is done, just waiting for tuning. i dont know much about the kpro however. i was hoping that Mase would head back to AL some time soon, but as busy as he is, im not sure when that will be.
how much would u guys charge just for a partial throttle tune? so i can atleast drive it while I figure out who is going to complete the tune.
setup is a built type s gt35r 1000cc injectors etc.
03-27-2006, 08:24 AM
#13
Join Date: Feb 2005
Location: AL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (Blown90hatcH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH »</TD></TR><TR><TD CLASS="quote">05RSX - I will PM you.</TD></TR></TABLE>
do you have a lot of experience tuning?
im a little worried about letting anyone touch my rather expensive investment LOL
do you have a lot of experience tuning?
im a little worried about letting anyone touch my rather expensive investment LOL
03-27-2006, 09:44 AM
#15
Honda-Tech Member
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (05RSX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 05RSX »</TD></TR><TR><TD CLASS="quote">
do you have a lot of experience tuning?
im a little worried about letting anyone touch my rather expensive investment LOL</TD></TR></TABLE>
I have been tuning for a couple years. I understand about your investment. My car has more in it their your car does and makes 650 on a light day for a couple years now.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by purehonda »</TD></TR><TR><TD CLASS="quote">You think you can tune a JRSC @10psi? I'm running the s200. Also, how much is dyno time?</TD></TR></TABLE>
No problem. I returned your PM as well. Dyno time will be dependant on cars dynoing. Right now, we have two people wanting dyno time, but I want to get at least four since we rent the dyno out for the entire day. We will have a better handle on Wednesday or so.
do you have a lot of experience tuning?
im a little worried about letting anyone touch my rather expensive investment LOL</TD></TR></TABLE>
I have been tuning for a couple years. I understand about your investment. My car has more in it their your car does and makes 650 on a light day for a couple years now.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by purehonda »</TD></TR><TR><TD CLASS="quote">You think you can tune a JRSC @10psi? I'm running the s200. Also, how much is dyno time?</TD></TR></TABLE>
No problem. I returned your PM as well. Dyno time will be dependant on cars dynoing. Right now, we have two people wanting dyno time, but I want to get at least four since we rent the dyno out for the entire day. We will have a better handle on Wednesday or so.
03-27-2006, 02:28 PM
#16
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (Blown90hatcH)
Both mrbsponge and Blown90Hatch are great guys. Would trust them with my car.
03-27-2006, 04:46 PM
#18
Honda-Tech Member
Thread Starter
Re: (lzylst)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">Both mrbsponge and Blown90Hatch are great guys. Would trust them with my car.</TD></TR></TABLE>
thanks bro, same goes for you too
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lzylst »</TD></TR><TR><TD CLASS="quote">blown90hatch - are you 60-1 ek on TR?</TD></TR></TABLE>
yes he is, and i am NCHATCH on thier as well.
thanks bro, same goes for you too
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lzylst »</TD></TR><TR><TD CLASS="quote">blown90hatch - are you 60-1 ek on TR?</TD></TR></TABLE>
yes he is, and i am NCHATCH on thier as well.
03-27-2006, 06:41 PM
#20
Honda-Tech Member
Thread Starter
Re: (lzylst)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lzylst »</TD></TR><TR><TD CLASS="quote">Ohhh, ok I was talking with 60-1 about a few things about 2 weeks ago.
Definately willing to help and a useful conversation (FJO injector driver)</TD></TR></TABLE>
we are always willing to lend a hand if we can
Definately willing to help and a useful conversation (FJO injector driver)</TD></TR></TABLE>
we are always willing to lend a hand if we can
03-27-2006, 06:47 PM
#21
Honda-Tech Member
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (0x64)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">Both mrbsponge and Blown90Hatch are great guys. Would trust them with my car.</TD></TR></TABLE>
Thanks Alpha. Hurry up and finish your car already.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lzylst »</TD></TR><TR><TD CLASS="quote">Ohhh, ok I was talking with 60-1 about a few things about 2 weeks ago.
Definately willing to help and a useful conversation (FJO injector driver)</TD></TR></TABLE>
Yeah man. Glad I could help out. Always busy but want to help when I can.
Thanks Alpha. Hurry up and finish your car already.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lzylst »</TD></TR><TR><TD CLASS="quote">Ohhh, ok I was talking with 60-1 about a few things about 2 weeks ago.
Definately willing to help and a useful conversation (FJO injector driver)</TD></TR></TABLE>
Yeah man. Glad I could help out. Always busy but want to help when I can.
03-28-2006, 06:25 AM
#22
Honda-Tech Member
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (Blown90hatcH)
Looks like we will be booking the dyno as well. I will Pm everyone with the dyno costs.
Jason
Jason
03-28-2006, 06:36 AM
#23
Member
Join Date: Feb 2003
Location: fort walton beach, fl, usa
Posts: 1,232
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (Blown90hatcH)
dyno costs? whats this you speak of. butt dyno says 200ish hp... haha cant wait till friday what time are we kicking this off takes me about 2 hrs to get to mobile
03-28-2006, 07:03 AM
#24
Member
Join Date: Apr 2003
Location: Now in SoCal, CA, USA
Posts: 1,210
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (zeroice)
Ahh Mobil AL... that's where I drove to get my alreay turbo'd EM1 all the way from Boston (and back in one weekend)... memories of when I fell into the dark side...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">Both mrbsponge and Blown90Hatch are great guys. Would trust them with my car.</TD></TR></TABLE>
This guy always pointed me in the right direction so here's my vouch
that and the fact that I went to Tampa for a visit and I meet this dude prowlin the streets with a 900+hp Vette (3 stage nos setup) and the guy says the only cars on the road he's afraid of is a few supra's and this one crazy civic (Blown90Hatch)... pfft, still not over that ****...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">Both mrbsponge and Blown90Hatch are great guys. Would trust them with my car.</TD></TR></TABLE>
This guy always pointed me in the right direction so here's my vouch
that and the fact that I went to Tampa for a visit and I meet this dude prowlin the streets with a 900+hp Vette (3 stage nos setup) and the guy says the only cars on the road he's afraid of is a few supra's and this one crazy civic (Blown90Hatch)... pfft, still not over that ****...
03-28-2006, 07:06 AM
#25
Honda-Tech Member
Re: Dyno Tuning Day in Mobile Alabama.....need some input/interest? (zeroice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zeroice »</TD></TR><TR><TD CLASS="quote">dyno costs? whats this you speak of. butt dyno says 200ish hp... haha cant wait till friday what time are we kicking this off takes me about 2 hrs to get to mobile</TD></TR></TABLE>
I will call you tonight or tomorrow night to discuss locations and times.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbosi03 »</TD></TR><TR><TD CLASS="quote">Ahh Mobil AL... that's where I drove to get my alreay turbo'd EM1 all the way from Boston (and back in one weekend)... memories of when I fell into the dark side...
This guy always pointed me in the right direction so here's my vouch
that and the fact that I went to Tampa for a visit and I meet this dude prowlin the streets with a 900+hp Vette (3 stage nos setup) and the guy says the only cars on the road he's afraid of is a few supra's and this one crazy civic (Blown90Hatch)... pfft, still not over that ****... </TD></TR></TABLE>
Haha. Vince's vette will always be awesome. I will get a race in with him eventually.
Here is a small clip of my car on the dyno and track because because
http://photos.imageevent.com/j...d.wmv
I will call you tonight or tomorrow night to discuss locations and times.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbosi03 »</TD></TR><TR><TD CLASS="quote">Ahh Mobil AL... that's where I drove to get my alreay turbo'd EM1 all the way from Boston (and back in one weekend)... memories of when I fell into the dark side...
This guy always pointed me in the right direction so here's my vouch
that and the fact that I went to Tampa for a visit and I meet this dude prowlin the streets with a 900+hp Vette (3 stage nos setup) and the guy says the only cars on the road he's afraid of is a few supra's and this one crazy civic (Blown90Hatch)... pfft, still not over that ****... </TD></TR></TABLE>
Haha. Vince's vette will always be awesome. I will get a race in with him eventually.
Here is a small clip of my car on the dyno and track because because
http://photos.imageevent.com/j...d.wmv