Dyno Results: t4/60-1 26 psi b18c1
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Georgia
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Results: t4/60-1 26 psi b18c1
I just got around to getting tuned. Ed from Balanced Performance did the tuning Im satisfied overall. It was tuned on Hondata. Its a b18c1 84mm Darton sleeves,9:1 cr, 1mm oversized valves, Full Race a/c manifold, t4/60-1.
#7
Trial User
Join Date: Aug 2004
Location: Charlotte, nc, us
Posts: 1,065
Likes: 0
Received 0 Likes
on
0 Posts
Re: (anothaRRR)
what kinda spool times do you get? im going to be running a garrett t3/60-1 on my 81.5 GSR motor with 9.7:1 comp. couldnt find anything on spool times with the t3 flange, but what are your spool times like? to the sick setup
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Georgia
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SSBPGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SSBPGSR »</TD></TR><TR><TD CLASS="quote">what kinda spool times do you get? im going to be running a garrett t3/60-1 on my 81.5 GSR motor with 9.7:1 comp. couldnt find anything on spool times with the t3 flange, but what are your spool times like? to the sick setup </TD></TR></TABLE>
It should spool much better on yours with higher comp. and a t3 turbine. Mine starts out a little laggy but once it hits like 15 psi it just spools up like nothing to 26 psi.
It should spool much better on yours with higher comp. and a t3 turbine. Mine starts out a little laggy but once it hits like 15 psi it just spools up like nothing to 26 psi.
#12
Member
Join Date: Jan 2003
Location: Minneapolis, MN
Posts: 2,202
Likes: 0
Received 0 Likes
on
0 Posts
Re: (11psiTurboSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 11psiTurboSI »</TD></TR><TR><TD CLASS="quote">Nice #'s </TD></TR></TABLE>
I'm with stupid..
I'm with stupid..
#16
Honda-Tech Member
Join Date: Jun 2003
Location: NYC bitchessss
Posts: 9,555
Likes: 0
Received 0 Likes
on
0 Posts
Re: (anothaRRR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by anothaRRR »</TD></TR><TR><TD CLASS="quote">
It should spool much better on yours with higher comp. </TD></TR></TABLE>
noooooooo!!!!!!!!!!!!!!!!!!!!!
It should spool much better on yours with higher comp. </TD></TR></TABLE>
noooooooo!!!!!!!!!!!!!!!!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
mrbsponge
Forced Induction
14
05-17-2005 03:28 AM
phiberoptik
Forced Induction
5
09-30-2004 07:20 PM