Dump tube broke off (!!?!?!?!?!)
#1
Senior Member
Thread Starter
Dump tube broke off (!!?!?!?!?!)
Well, my dump tube broke off.... stainless steel welded to the flange. Hmmm!
WTF? I guess the heat cycles killed it. It broke off at turn 12 at Mid-Ohio (shrug).
Well, I got this MAP torch.... found a pipe that looks like it'll fit.....
Voila. Worst weld I've ever done. Well, first weld I've ever done.
Later,
Chris
WTF? I guess the heat cycles killed it. It broke off at turn 12 at Mid-Ohio (shrug).
Well, I got this MAP torch.... found a pipe that looks like it'll fit.....
Voila. Worst weld I've ever done. Well, first weld I've ever done.
Later,
Chris
#2
Re: Dump tube broke off (ccfries)
haha
That's ill.
Last year a few friends and I were heading down to Maryland for a VW show and his wastegate and dumptube were hanging (via the vacuum line), in the engine bay. His turbo manifold cracked and the wastegate flew right off , so it was pretty crazy.
Funny **** though.
Nice weld by the way Bubble gum
That's ill.
Last year a few friends and I were heading down to Maryland for a VW show and his wastegate and dumptube were hanging (via the vacuum line), in the engine bay. His turbo manifold cracked and the wastegate flew right off , so it was pretty crazy.
Funny **** though.
Nice weld by the way Bubble gum
#5
Senior Member
Thread Starter
Re: Dump tube broke off (REMUS 13)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by REMUS 13 »</TD></TR><TR><TD CLASS="quote">That weld should hold up. Take it from me...the one on my downpipe flange to my downpipe is worse than that one! </TD></TR></TABLE>
I mean, really, the tube weighs like 1 pound.... how much stress is on it (besides heat expansion/contraction)
This was a good place to practice welding. Can't see it anyway, the tube points down in the engine bay. If it breaks off, I run to Napa for another 5 dollar pipe and a fresh bottle of O2.
-Chris
I mean, really, the tube weighs like 1 pound.... how much stress is on it (besides heat expansion/contraction)
This was a good place to practice welding. Can't see it anyway, the tube points down in the engine bay. If it breaks off, I run to Napa for another 5 dollar pipe and a fresh bottle of O2.
-Chris
#6
Re: Dump tube broke off (REMUS 13)
I had no idea you could weld with those propane tanks from home depot, Im gonna get a few and learn to weld. Where did you get the metal rods?
Remus 13, did he have a SSAutoChrome mani?
EDIT- it looks like your mixing those two gasses, are you? And what are they?
Remus 13, did he have a SSAutoChrome mani?
EDIT- it looks like your mixing those two gasses, are you? And what are they?
#7
Re: Dump tube broke off (tegunderpressure)
Nah man. This was on my friend's VW 2.0 Turbo. The manifold cracked and his car sounded like ***.
By the way, his manifold is from http://www.atpturbo.com.
By the way, his manifold is from http://www.atpturbo.com.
Trending Topics
#8
Senior Member
Thread Starter
Re: Dump tube broke off (tegunderpressure)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegunderpressure »</TD></TR><TR><TD CLASS="quote">I had no idea you could weld with those propane tanks from home depot, Im gonna get a few and learn to weld. Where did you get the metal rods?
Remus 13, did he have a SSAutoChrome mani?
EDIT- it looks like your mixing those two gasses, are you? And what are they?</TD></TR></TABLE>
Go to home depot, they sell MAPP gas, Oxygen, little welding rods, a sparker and a torch thingy for... ummm... maybe $45, I bought it a while ago. It's all-in-one box.
Propane is too cool to weld with. MAPP gas is hotter, and the pure oxygen makes it super hot. It's mixed in the tip.
-Chris
Remus 13, did he have a SSAutoChrome mani?
EDIT- it looks like your mixing those two gasses, are you? And what are they?</TD></TR></TABLE>
Go to home depot, they sell MAPP gas, Oxygen, little welding rods, a sparker and a torch thingy for... ummm... maybe $45, I bought it a while ago. It's all-in-one box.
Propane is too cool to weld with. MAPP gas is hotter, and the pure oxygen makes it super hot. It's mixed in the tip.
-Chris
#12
Senior Member
Thread Starter
Re: Dump tube broke off (InTeGrA B18b1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by InTeGrA B18b1 »</TD></TR><TR><TD CLASS="quote">maybe you could brace it, take some weight off it.</TD></TR></TABLE>
There really isn't any weight on it, just the weight of 14" of tube.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedJeff »</TD></TR><TR><TD CLASS="quote">any better pics?</TD></TR></TABLE>
Nope, I have some before-pics though.
There really isn't any weight on it, just the weight of 14" of tube.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedJeff »</TD></TR><TR><TD CLASS="quote">any better pics?</TD></TR></TABLE>
Nope, I have some before-pics though.
#13
In-N-Out Burger
Join Date: Apr 2003
Location: 1320ft OC LA, XX, USA
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dump tube broke off (ccfries)
OFF TOPIC, but where did you get that external wastegate welded at? And how much? Just curious. It looks like quality work to me
#15
Senior Member
Thread Starter
Re: Dump tube broke off (NightRider-gsR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NightRider-gsR »</TD></TR><TR><TD CLASS="quote">OFF TOPIC, but where did you get that external wastegate welded at? And how much? Just curious. It looks like quality work to me </TD></TR></TABLE>
CJ Motorsports in Batavia IL. Yeah they did a good job.
CJ Motorsports in Batavia IL. Yeah they did a good job.
Thread
Thread Starter
Forum
Replies
Last Post
TunerShark
Forced Induction
4
02-06-2007 10:51 PM