Notices

Did some tuning today...

Thread Tools
 
Search this Thread
 
Old 10-05-2003, 06:44 PM
  #1  
Honda-Tech Member
Thread Starter
 
boosted hybrid's Avatar
 
Join Date: Sep 2001
Posts: 4,116
Likes: 0
Received 2 Likes on 2 Posts
Default Did some tuning today...

I did some tuning today, here are the results:


Mpir3 Del sol. Specs: Stock b16a block, inline pro headgasket, cam gears, arp head studs, obx manifold, 60 trim t3/t4oe .63a/r, 450 DSM injectors, Hondata s100 w/boost, 3" open dp, Tial wastegate and Sheepdog BOV. Tuning was done at 14psi.


DLOTYPER's gsr swapped SI hatch. Specs: Stock block gsr, Drag Gen III turbo kit, 3" exhaust, Skunk2 intake manifold, turbo xs boost controller, 550cc injectors, Hondata 2b. Tuning was done at 10psi.


DC2R714's ITR. Specs: Darton sleeved b18c5 bottom end, 9.8:1 compression, spf manifold, 60 trim t3/to4e .82 a/r, 3" dp and 3" exhaust, 720cc injectors, Hondata s100, AVCR boost controller. Tuning was done at 1 bar.


Modified by boosted hybrid at 8:40 PM 10/7/2003


Modified by boosted hybrid at 5:01 PM 5/17/2004
Old 10-05-2003, 06:49 PM
  #2  
 
bigwig's Avatar
 
Join Date: Sep 2003
Location: Somerset, NJ, USA
Posts: 708
Likes: 0
Received 0 Likes on 0 Posts
Default

Def. going to see ya when i get uberdata!
Old 10-05-2003, 06:52 PM
  #3  
Honda-Tech Member
 
Diablo Tejano's Avatar
 
Join Date: Nov 2002
Posts: 195
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (boosted hybrid)

I was about to remark on the fact that you were able to get the exact same plots on two totally different motors.

I look forward to the other chart.

Nice numbers.
Old 10-05-2003, 07:06 PM
  #4  
Honda-Tech Member
 
roydogg's Avatar
 
Join Date: Apr 2002
Location: Somewhere in South Philly, usa
Posts: 2,954
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (Masekja)

Once again nice numbers. Can't wait til I'm done and ready to visit you.
How much time did you spend tuning each car? Any problems tuning the hondata's?
Old 10-05-2003, 07:08 PM
  #5  
Honda-Tech Member
 
SiRkid's Avatar
 
Join Date: Jun 2001
Location: Canada City
Posts: 5,391
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (roydogg)



Old 10-06-2003, 06:23 AM
  #6  
Honda-Tech Member
 
Andrea's Avatar
 
Join Date: Sep 2003
Location: Easton, PA
Posts: 1,171
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (boosted hybrid)

Looking good! Good power from stock blocks!
Old 10-06-2003, 07:04 AM
  #7  
Honda-Tech Member
 
DC2R714's Avatar
 
Join Date: Nov 2001
Location: KOP, PA, USA
Posts: 2,685
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (50trim EK)

THat graph was actually not my highest. We ended up around 325-330whp the final pull. Jeff the car feels great. I drove it after you guys left last night, and only on low boost I was scared as **** hahaha. I was like holy *****! It pulls like a bastard.
Old 10-06-2003, 07:25 AM
  #8  
Member
 
quickda6's Avatar
 
Join Date: Dec 2001
Location: PA, usa
Posts: 1,052
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (DC2R714)

congrats on some good numbers nate, you made it i heard dan laid some power down as well, good to hear you boys had a good day
Old 10-06-2003, 07:50 AM
  #9  
Honda-Tech Member
 
DC2R714's Avatar
 
Join Date: Nov 2001
Location: KOP, PA, USA
Posts: 2,685
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (quickda6)

thanks. I heard you had some trouble saturday. WHat ended up happening?
Old 10-06-2003, 08:02 AM
  #10  
Member
 
quickda6's Avatar
 
Join Date: Dec 2001
Location: PA, usa
Posts: 1,052
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (DC2R714)

i went up thurs, just to lay down a few pulls... whenever ive been on the dyno, ive held the steering wheel, art didnt want me to touch it on his. so halfway through pull, the wheels just turned to right cause of open-diff...car didnt move move, but it was a little scary. at 4500 it was makin 200whp/217ft/lbs...i let off right then cause of the wheel turnin...i guess they had never had on open-diff car on the dyno there.
Old 10-06-2003, 08:08 AM
  #11  
Honda-Tech Member
 
racerxadam's Avatar
 
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today...

You guys all left before Dan and I finished. I managed to get 330 hp and 242 ft/lb out of Dan's car at 11 psi. We tried to turn the boost up a pound but we ended up hitting the limit of the factory map sensor, it started making something like 350 around 6500 on that pull but it was pretty lean. Final pull on a hot motor was 321hp and i think 233 tq at 11psi. I was pretty happy with that, and I think Dan was too.

BTW Dan = 93lsivic
Old 10-06-2003, 08:23 AM
  #12  
Member
 
Mikes01GSR's Avatar
 
Join Date: Oct 2001
Location: Butler, PA, usa
Posts: 1,669
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (racerxadam)

I can't wait to have Jeff tune my car in the spring. Should be a good time!!!
Old 10-06-2003, 10:24 AM
  #13  
TurboJesse
Guest
 
Posts: n/a
Default Re: Did some tuning today... (Mikes01GSR)

Old 10-06-2003, 10:37 AM
  #14  
Honda-Tech Member
 
PM-Performance's Avatar
 
Join Date: Sep 2001
Location: Reading, PA, usa
Posts: 12,978
Likes: 0
Received 1 Like on 1 Post
Default Re: Did some tuning today... (Mpir3)

Hey Josh , i got into that same arguement at Xotic, my car started pulling and they were telling me not to touch the wheel , i told thme unless they wanted to pay for the car after it shot off the rollers to shut the **** up and i held onto it .
Nice numbes guys. Nate , your almost there man . I know its been a while and alot of heartache, but its well worth it aint .
Old 10-06-2003, 10:44 AM
  #15  
Honda-Tech Member
 
DC2R714's Avatar
 
Join Date: Nov 2001
Location: KOP, PA, USA
Posts: 2,685
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (itr206)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itr206 &raquo;</TD></TR><TR><TD CLASS="quote">
Nice numbes guys. Nate , your almost there man . I know its been a while and alot of heartache, but its well worth it aint . </TD></TR></TABLE>

Ya Pete it was a good day. Everyone made over 300whp. I was especially impressed with the guy with the Stock GSR motor and a drag kit putting down 317whp @ 10psi.
Old 10-06-2003, 10:49 AM
  #16  
TurboJesse
Guest
 
Posts: n/a
Default Re: Did some tuning today... (DC2R714)

Yea i had a great day Would have been better if my 550's worked but oh well...Jeff did a great job
Old 10-06-2003, 04:20 PM
  #17  
 
big tool's Avatar
 
Join Date: Jul 2003
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (Mpir3)

Nice numbers once again, Jeff!
Old 10-06-2003, 05:25 PM
  #18  
Honda-Tech Member
 
ricodemus's Avatar
 
Join Date: Apr 2002
Location: The First State
Posts: 5,246
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (pkoury)

I'm excited to join you guys one of these days to have my car tuned.
Old 10-06-2003, 06:22 PM
  #19  
Honda-Tech Member
 
T4eg's Avatar
 
Join Date: Jul 2003
Location: VA
Posts: 2,784
Likes: 0
Received 1 Like on 1 Post
Default Re: Did some tuning today... (50trim EK)

Old 10-06-2003, 07:12 PM
  #20  
Honda-Tech Member
 
underpressure02's Avatar
 
Join Date: Sep 2002
Location: Allentown, PA, USA
Posts: 6,663
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (BlueHatch00)

when was this dyno day?
Old 10-06-2003, 07:16 PM
  #21  
Honda-Tech Member
 
DC2R714's Avatar
 
Join Date: Nov 2001
Location: KOP, PA, USA
Posts: 2,685
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (underpressure02)

Wasnt really a dyno day. It was a few people that were waiting for Jeff from the summer. 93lsivic tuned his own car with the help of RacerXadam using AEM EMS extracted a fantastic 322whp @ 9psi, and who says Full Race doesnt make a kickass manifold
Old 10-07-2003, 10:25 AM
  #22  
Honda-Tech Member
 
racerxadam's Avatar
 
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (racerxadam)

I was close with Dan's numbers. Here's his graph for the hell of it.

wow, it came out kinda small, max power is 321 and tq is 236
Old 10-07-2003, 04:42 PM
  #23  
Honda-Tech Member
Thread Starter
 
boosted hybrid's Avatar
 
Join Date: Sep 2001
Posts: 4,116
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Did some tuning today... (racerxadam)

Other dyno graph added.
Old 10-07-2003, 05:35 PM
  #24  
Honda-Tech Member
 
cr00klyn718's Avatar
 
Join Date: Feb 2002
Location: NYC
Posts: 3,110
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (boosted hybrid)

nice work
Old 10-07-2003, 07:01 PM
  #25  
Honda-Tech Member
 
turbologist's Avatar
 
Join Date: Nov 2001
Location: NoVA
Posts: 996
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Did some tuning today... (boosted hybrid)

ur a beast....


Quick Reply: Did some tuning today...



All times are GMT -8. The time now is 09:39 AM.