D16Z6 makes 250whp 203trq st00pid tuned!
06-19-2005, 06:34 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Houston, Texas, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
D16Z6 makes 250whp 203trq st00pid tuned!
Many may rember this setup for a while back that we did for our buddy Ivan
but now we have finally got some dyno numbers to back it up.
The setup:
Stock d16z6 (for now
)
Garrett T3 48 ar exhaust 60 ar intake
tial 35mm wastegate
bmc 2.5" 304 polished stainless charge lines, air filter tube, bov vent back tube
bmc 304 log manifold
bmc 304 full 3" downpipe with FACTORY X MEMBER AND ZERO NOTCHING AND ZERO DENTING
bmc 304 dumptube
johnnyracecar new style 8" intercooler
neptune tuned by Jason @ Autologic
1000cc rc injectors
greddy type s bov
Red is 15psi of boost
Blue is 4 psi of boost
Tuning was done at Autologic on Jason's new DynoJet
trq starts dropping off because the turbo isnt big enough for his setup
HUGE THANKS TO JASON, AKA: ST00PID FOR MAKING IT HAPPEN!
but now we have finally got some dyno numbers to back it up.
The setup:
Stock d16z6 (for now
)Garrett T3 48 ar exhaust 60 ar intake
tial 35mm wastegate
bmc 2.5" 304 polished stainless charge lines, air filter tube, bov vent back tube
bmc 304 log manifold
bmc 304 full 3" downpipe with FACTORY X MEMBER AND ZERO NOTCHING AND ZERO DENTING
bmc 304 dumptube
johnnyracecar new style 8" intercooler
neptune tuned by Jason @ Autologic
1000cc rc injectors
greddy type s bov
Red is 15psi of boost
Blue is 4 psi of boost
Tuning was done at Autologic on Jason's new DynoJet
trq starts dropping off because the turbo isnt big enough for his setup
HUGE THANKS TO JASON, AKA: ST00PID FOR MAKING IT HAPPEN!
06-19-2005, 07:01 PM
#6
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Houston, Texas, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Blue98Ex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blue98Ex »</TD></TR><TR><TD CLASS="quote">1000cc injectors on a stock D thats crazy... Good numbers though 
</TD></TR></TABLE>
He has those because he plans on dropping a fully built engine in there and going for 500whp.
</TD></TR></TABLE>He has those because he plans on dropping a fully built engine in there and going for 500whp.
06-19-2005, 07:05 PM
#7
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Houston, Texas, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Re: (meanB6teen)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by meanB6teen »</TD></TR><TR><TD CLASS="quote">Those are some really great numbers with that setup.</TD></TR></TABLE>
thanks man!
once he gets a better turbo on there (the one he has now has aprox 120,000 miles on it) he should be putting out even better numbers, he plans to put an sc61 on there pretty soon so he will get massive high end and be ready for the engine that he is building.
thanks man!
once he gets a better turbo on there (the one he has now has aprox 120,000 miles on it) he should be putting out even better numbers, he plans to put an sc61 on there pretty soon so he will get massive high end and be ready for the engine that he is building.
Trending Topics
06-19-2005, 07:49 PM
#10
Honda-Tech Member
Join Date: Dec 2003
Location: Winchester, VA, USA
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BigMoneyP)
How does that charge pipe/bov setup work? Is the bov between the turbo and the fmic and does it recirculate between the filter and the turbo?
06-20-2005, 03:50 AM
#12
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Houston, Texas, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DanW)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DanW »</TD></TR><TR><TD CLASS="quote">How does that charge pipe/bov setup work? Is the bov between the turbo and the fmic and does it recirculate between the filter and the turbo?</TD></TR></TABLE>
yep that is exactly how it is
yep that is exactly how it is
06-20-2005, 06:55 AM
#13
Honda-Tech Member
Join Date: May 2003
Location: Portland, Oregon
Posts: 5,735
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BmCRace.com)
Wow...
Great numbers for a STOCK engine
Is he going to drive it daily at that boost level?
What kind of map sensor is he using?
I don't think I've seen anyone take a stock d16z6 up to 15psi before, that's unheard of!
Great numbers for a STOCK engine
Is he going to drive it daily at that boost level?
What kind of map sensor is he using?
I don't think I've seen anyone take a stock d16z6 up to 15psi before, that's unheard of!
06-20-2005, 07:11 PM
#16
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Houston, Texas, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EJ1 wilcox)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ1 wilcox »</TD></TR><TR><TD CLASS="quote">Wow...
Great numbers for a STOCK engine
Is he going to drive it daily at that boost level?
What kind of map sensor is he using?
I don't think I've seen anyone take a stock d16z6 up to 15psi before, that's unheard of! </TD></TR></TABLE>
it is a msd 3 bar map sensor
yes it is a daily driver and ivan loves to beat on it.
Great numbers for a STOCK engine
Is he going to drive it daily at that boost level?
What kind of map sensor is he using?
I don't think I've seen anyone take a stock d16z6 up to 15psi before, that's unheard of!
</TD></TR></TABLE>it is a msd 3 bar map sensor
yes it is a daily driver and ivan loves to beat on it.
06-22-2005, 01:19 AM
#19
Honda-Tech Member
Re: (Tomek)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tomek »</TD></TR><TR><TD CLASS="quote">good lord, thats awesome
makes me wish I pushed my sohc turbo more when I had it.</TD></TR></TABLE>
and on a stock engine! I think im gonna buy me a ek sedan in the near future and make it a beater. Four door, plenty of space and a turbo engine with plenty of grunt, what could be better 
makes me wish I pushed my sohc turbo more when I had it.</TD></TR></TABLE>
and on a stock engine
! I think im gonna buy me a ek sedan in the near future and make it a beater. Four door, plenty of space and a turbo engine with plenty of grunt, what could be better
06-22-2005, 04:34 AM
#22
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Houston, Texas, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Quad-Damage)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Quad-Damage »</TD></TR><TR><TD CLASS="quote">what kinda of intake manifold is that
OBX or Focus 2?
look like the one i just sold</TD></TR></TABLE>
Neither he, or I know what intake manifold that is, he got it from one of his friends for $25.
-James
OBX or Focus 2?
look like the one i just sold</TD></TR></TABLE>
Neither he, or I know what intake manifold that is, he got it from one of his friends for $25.
-James
06-22-2005, 06:42 AM
#24
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Houston, Texas, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1boostedcivic)
he is running hardcore, open downpipe
i am supposed to do him his custom exhaust pretty sooon
it will be all 3" with a 3" magnaflow oval muffler
i am supposed to do him his custom exhaust pretty sooon
it will be all 3" with a 3" magnaflow oval muffler
06-22-2005, 07:33 AM
#25
Member
Join Date: Oct 2003
Location: omaha, ne, United States
Posts: 1,410
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BmCRace.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BmCRace.com »</TD></TR><TR><TD CLASS="quote">he is running hardcore, open downpipe
i am supposed to do him his custom exhaust pretty sooon
it will be all 3" with a 3" magnaflow oval muffler</TD></TR></TABLE>
lol.
i am supposed to do him his custom exhaust pretty sooon
it will be all 3" with a 3" magnaflow oval muffler</TD></TR></TABLE>
lol.