d15b7 turbo using p28 and injector size?
12-19-2011, 12:38 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: Oroville, CA, US
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
d15b7 turbo using p28 and injector size?
94 civic cx with a d15b7 turbo on 3 or 5psi wastegate soon
gonna run this til my built z6 is ready
i have a p28 ecu that was tuned for a stock z6 on 7psi
my question is can i use the p28 on the d15b7 and retune and disable vtec
or do i have to get my po6 chipped and tuned?
also will stock 240cc hold 3 or 5psi with B&M fuel pressure regulator?
ive read that it can and cannot
i do have precision 650cc saturated
thanks
gonna run this til my built z6 is ready
i have a p28 ecu that was tuned for a stock z6 on 7psi
my question is can i use the p28 on the d15b7 and retune and disable vtec
or do i have to get my po6 chipped and tuned?
also will stock 240cc hold 3 or 5psi with B&M fuel pressure regulator?
ive read that it can and cannot
i do have precision 650cc saturated
thanks
12-19-2011, 03:21 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: Oroville, CA, US
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
beginmyhonda
Honda Civic / Del Sol (1992 - 2000)
11
12-19-2011 04:21 PM
