Crowers Econo Billets Rods opinions needed
10-10-2002, 10:30 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Where N/A is Not Applicable
Posts: 4,361
Likes: 0
Received 0 Likes
on
0 Posts
Crowers Econo Billets Rods opinions needed
The Econo Billet rods has anyone tried them I am after some rods for my sohc zc same specs as a d16a6. I am wanting to use them and some SRP pistons(8.5.1 to boost up say 20 psi.....Would those rods take the beating ??? Oh what else in the way of bolstering my engine would be needed to boost this high??Would just a block gaurd do??
http://www.crower.com/cat/import/honda/rods.shtml
There's a link to them
Thanks
http://www.crower.com/cat/import/honda/rods.shtml
There's a link to them
Thanks
10-10-2002, 05:27 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Where N/A is Not Applicable
Posts: 4,361
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crowers Econo Billets Rods opinions needed (tygsr)
I check out the site, do they make rods for the D16a6?? How about some pistons?? How much would you want for them.
Trending Topics
10-10-2002, 07:25 PM
#8
New User
Join Date: Jul 2001
Location: Clearwater, Fl, USA
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crowers Econo Billets Rods opinions needed (tSuperbike69)
I personally would never put anything that said "ECONO" in my motor. Eagles are the ****
10-10-2002, 08:12 PM
#10
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Where N/A is Not Applicable
Posts: 4,361
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crowers Econo Billets Rods opinions needed (blufke)
Ok get the message anyone want to name a place where I can get them over the internet, B18bturbo's site is not that great it doesn't give specific info like what application the rods are for etc.. Oh what pistons SRP all good????
Thread
Thread Starter
Forum
Replies
Last Post
