Colorado Race Fab's Eg hatch build
#1
Honda-Tech Member
Thread Starter
Colorado Race Fab's Eg hatch build
My name is Taylor from colorado race fab. Here is my car a 1992 Honda Civic cx I have owned it since 2007 slowly building it to what it is today with the help of friends at Co Race Fab and PFIspeed.
It started off as a clean white hatch with some carbon parts literally spotless when a friend of mine bought it.(not a honda guy) Propelled by a d15b2 block and a y6 head without a vtec ecu or wiring he drove it like that for 8 months without changing a thing and delivering pizzas through the winter. I acquired it through a trade not so clean anymore and still running like crap and from there it began.
https://honda-tech.com/attachment.ph...1&d=1316656481
poop
https://honda-tech.com/attachment.ph...1&d=1316656710
I first bought a DA integra wrecked just for the swap and then bought a GSR tranny and started cleaning the entire car before putting it back together. Drove it like that for 6 months and loved it.
A deal came up for trading my labor and my LS motor for a GSR longblock
Had the stock GSR for a year or so with an AFC and chipped ECU but wanted to turbo the car the whole time....
It started off as a clean white hatch with some carbon parts literally spotless when a friend of mine bought it.(not a honda guy) Propelled by a d15b2 block and a y6 head without a vtec ecu or wiring he drove it like that for 8 months without changing a thing and delivering pizzas through the winter. I acquired it through a trade not so clean anymore and still running like crap and from there it began.
https://honda-tech.com/attachment.ph...1&d=1316656481
poop
https://honda-tech.com/attachment.ph...1&d=1316656710
I first bought a DA integra wrecked just for the swap and then bought a GSR tranny and started cleaning the entire car before putting it back together. Drove it like that for 6 months and loved it.
A deal came up for trading my labor and my LS motor for a GSR longblock
Had the stock GSR for a year or so with an AFC and chipped ECU but wanted to turbo the car the whole time....
#2
Honda-Tech Member
Thread Starter
Re: Colorado Race Fab's Eg hatch build
And then we pieced together a turbo kit and went to town putting it together on the stock motor. I had about 5$ in the car at this point and made 226 at 12 lbs on a beat up t3 and a cast manifold and hondata.
That setup went 12.71 @ 107??
Then we turned it up to 18lbs and made 447 for a race in pueblo
went numerous 11.6s until the finals
went 11.1@133 missing second gear losing to an 11.0@130 (the green hatch)
my bad *** tuner told me he turned it up and to hold on up top so and i just drove like a girl and didnt win. it ended up making 21lbs that day and on an 11.3 pass at bandimere the stock block let go and #3 cracked.
https://honda-tech.com/attachment.ph...1&d=1316658382
https://honda-tech.com/attachment.ph...1&d=1316659163
https://honda-tech.com/attachment.ph...1&d=1316659163
That setup went 12.71 @ 107??
Then we turned it up to 18lbs and made 447 for a race in pueblo
went numerous 11.6s until the finals
went 11.1@133 missing second gear losing to an 11.0@130 (the green hatch)
my bad *** tuner told me he turned it up and to hold on up top so and i just drove like a girl and didnt win. it ended up making 21lbs that day and on an 11.3 pass at bandimere the stock block let go and #3 cracked.
https://honda-tech.com/attachment.ph...1&d=1316658382
https://honda-tech.com/attachment.ph...1&d=1316659163
https://honda-tech.com/attachment.ph...1&d=1316659163
#3
Honda-Tech Member
Thread Starter
Re: Colorado Race Fab's Eg hatch build
9/11/11 new setup
golden eagle sleeved b18c1
arias pistons 9:1 81.5mm
eagle rods
stock crank
stock head
golden eagle 81.5mm headgasket
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664748
https://honda-tech.com/attachment.ph...1&d=1316664748
golden eagle sleeved b18c1
arias pistons 9:1 81.5mm
eagle rods
stock crank
stock head
golden eagle 81.5mm headgasket
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664747
https://honda-tech.com/attachment.ph...1&d=1316664748
https://honda-tech.com/attachment.ph...1&d=1316664748
#7
Honda-Tech Member
Thread Starter
Re: Colorado Race Fab's Eg hatch build
some youtube videos of the most recent runs
fast foreword to 1:40 on the first video
http://www.youtube.com/watch?v=LQsFFmBtpj0
http://www.youtube.com/watch?v=3zKQEKJKhRI
fast foreword to 1:40 on the first video
http://www.youtube.com/watch?v=LQsFFmBtpj0
http://www.youtube.com/watch?v=3zKQEKJKhRI
Last edited by prelude89si; 09-22-2011 at 06:57 PM. Reason: needed to add a comment
Trending Topics
#8
Honda-Tech Member
Thread Starter
#10
Honda-Tech Member
Thread Starter
Re: Colorado Race Fab's Eg hatch build
Yes actually it went 10.91@133 a few sundays ago on lower boost... dont know exactly how much i try not to pay attention to whats going on with the tune at the track my tuner is the ****!(Nayr_One) Those times were at 5200ft ablove sea level by the way and it was the first time the car had seen a track or any paved surface in about a year
#11
Honda-Tech Member
iTrader: (1)
Join Date: Jul 2004
Location: Room Full of Padded Walls
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
Re: Colorado Race Fab's Eg hatch build
It made 617@23lbs??
Yes actually it went 10.91@133 a few sundays ago on lower boost... dont know exactly how much i try not to pay attention to whats going on with the tune at the track my tuner is the ****!(Nayr_One) Those times were at 5200ft ablove sea level by the way and it was the first time the car had seen a track or any paved surface in about a year
Yes actually it went 10.91@133 a few sundays ago on lower boost... dont know exactly how much i try not to pay attention to whats going on with the tune at the track my tuner is the ****!(Nayr_One) Those times were at 5200ft ablove sea level by the way and it was the first time the car had seen a track or any paved surface in about a year
#12
Honda-Tech Member
Re: Colorado Race Fab's Eg hatch build
dude sick man im haveing pfi work on my car now(dropped it off today lol) they're nice guys n ive only heard good things about them!
where's co. race fab? i havent heard of them, and would like to check them out.
on a side note, its cool to see some one reppin CO. know of any clubs/meets around here?
where's co. race fab? i havent heard of them, and would like to check them out.
on a side note, its cool to see some one reppin CO. know of any clubs/meets around here?
#13
Honda-Tech Member
Join Date: Oct 2005
Location: greeley, co, usa
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
Re: Colorado Race Fab's Eg hatch build
dude sick man im haveing pfi work on my car now(dropped it off today lol) they're nice guys n ive only heard good things about them!
where's co. race fab? i havent heard of them, and would like to check them out.
on a side note, its cool to see some one reppin CO. know of any clubs/meets around here?
where's co. race fab? i havent heard of them, and would like to check them out.
on a side note, its cool to see some one reppin CO. know of any clubs/meets around here?
Last edited by CO_RaceFab; 01-24-2014 at 07:50 AM.
#15
Honda-Tech Member
Re: Colorado Race Fab's Eg hatch build
im new to colorado i live in the springs but i own a ls/vtec integra and i am currently in afghanistan. i would verry much enjoyee tending to a honda/acura meet any info please let me no
#17
Honda-Tech Member
Thread Starter
Re: Colorado Race Fab's Eg hatch build
we also could start a co race fab meet up in greeley. just have to do it on a different night than the denver meets see if we can have some people come up north for once.
#19
Honda-Tech Member
Join Date: Oct 2005
Location: greeley, co, usa
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
Re: Colorado Race Fab's Eg hatch build
Update: we took the car to the vegas ifo event earlier this month and with a couple small changes and some tuning it went a personal. best of 10.38@145mph this was the cars 6th pass on the current setup. It had a pretty slow 8th mile time and a crappy 60' with some more seat time this car will go 9s with its super basic setup.
#20
Honda-Tech Member
Thread Starter
Re: Colorado Race Fab's Eg hatch build
UPDATE: With a few more changes we have a new PB ET and MPH.
Slip Breakdown
60 1.684
330 4.628
1/8 6.783
mph 114.04
1000' 8.588
1/4 10.083
mph 151.61
Had some issues with precision turbos not performing(6265, 6765), so we changed to a BW And may never go back again....
went with spinwerks 13x10 wheels THANKS DP! Best customer service around by FAR!
Changed from an areomotive 340 and bosch 044 inline to a single magnafuel monster pump
made 815whp with the new changes.
Please keep in mind that this is @ 5200ft above sea level on the side of the mountain
this car still uses 2.25" boost pipes/stock throttle body, an ebay intercooler stock axles and trans and is full interior @2400lbs
Slip Breakdown
60 1.684
330 4.628
1/8 6.783
mph 114.04
1000' 8.588
1/4 10.083
mph 151.61
Had some issues with precision turbos not performing(6265, 6765), so we changed to a BW And may never go back again....
went with spinwerks 13x10 wheels THANKS DP! Best customer service around by FAR!
Changed from an areomotive 340 and bosch 044 inline to a single magnafuel monster pump
made 815whp with the new changes.
Please keep in mind that this is @ 5200ft above sea level on the side of the mountain
this car still uses 2.25" boost pipes/stock throttle body, an ebay intercooler stock axles and trans and is full interior @2400lbs
#21
Honda-Tech Member
Thread Starter
Re: Colorado Race Fab's Eg hatch build
https://honda-tech.com/attachment.ph...1&d=1338310566
https://honda-tech.com/attachment.ph...1&d=1338310622
https://honda-tech.com/attachment.ph...1&d=1338031420
https://honda-tech.com/attachment.ph...1&d=1338031420
https://honda-tech.com/attachment.ph...1&d=1338310741
https://honda-tech.com/attachment.ph...1&d=1338310622
https://honda-tech.com/attachment.ph...1&d=1338031420
https://honda-tech.com/attachment.ph...1&d=1338031420
https://honda-tech.com/attachment.ph...1&d=1338310741
#24
Honda-Tech Member
Join Date: Oct 2004
Location: south jerz
Posts: 1,611
Likes: 0
Received 0 Likes
on
0 Posts