Close to hitting 11's..My track times with the Vitara setup
06-06-2005, 05:26 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Texas
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Close to hitting 11's..My track times with the Vitara setup
Last Saturday we took the hatch to the track and got some slicks...
We ran 12!!!!!!!! Sohc non Vtec Baby!!!!
Best time we did was a 12.4 @ 111mph. Full interior
We ran on a 22 X 8 X 13" rim SLicks (MT)
this is the best time slip(ill post it as soon as i scan it)
Reaction---> .380 (foul ji ji ji)
60 ft -------> 1.88
594 ft -----> 7.51
1/8 ET ----> 8.01 @ 89.69mph
1/4 ET ----> 12.44 @ 111.11
Ill post some pics later
Video ofthe track runs will also be posted later
Modified by fjt at 3:54 PM 6/6/2005
We ran 12!!!!!!!! Sohc non Vtec Baby!!!!
Best time we did was a 12.4 @ 111mph. Full interior
We ran on a 22 X 8 X 13" rim SLicks (MT)
this is the best time slip(ill post it as soon as i scan it)
Reaction---> .380 (foul ji ji ji)
60 ft -------> 1.88
594 ft -----> 7.51
1/8 ET ----> 8.01 @ 89.69mph
1/4 ET ----> 12.44 @ 111.11
Ill post some pics later
Video ofthe track runs will also be posted later
Modified by fjt at 3:54 PM 6/6/2005
06-06-2005, 06:26 AM
#7
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Texas
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1boostedcivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1boostedcivic »</TD></TR><TR><TD CLASS="quote">Damn. all i can say is damn. 12.4!!!! how much psi was this on fjt?? great time!!! that hatch must move like a bat outta hell!!!</TD></TR></TABLE>
18 PSI...basically same as when we did the dyno..We just corrected a boost leak that made her fluctuate between 17-and 18 PSI...
We still need to tune the partial throttle and lower rpms to see if we can get a better/faster launch and 1/8 mile time... I think she can still do a 12.2-12.1 with full interior..So were pretty confident on seeing 11 sec runs in the near future.
This was done on Pump Gas 93 octane..
We hope to do a Track setting on VP racing fuel once we get some other new mods.
Video of the runs should be ready for tomorrow
18 PSI...basically same as when we did the dyno..We just corrected a boost leak that made her fluctuate between 17-and 18 PSI...
We still need to tune the partial throttle and lower rpms to see if we can get a better/faster launch and 1/8 mile time... I think she can still do a 12.2-12.1 with full interior..So were pretty confident on seeing 11 sec runs in the near future.
This was done on Pump Gas 93 octane..
We hope to do a Track setting on VP racing fuel once we get some other new mods.
Video of the runs should be ready for tomorrow
Trending Topics
06-06-2005, 07:54 AM
#12
Junior Member
Join Date: Aug 2001
Location: Vancouver, BC, Canada
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
oh momma
congrats man
i might have to go with the vitara pistons and eagle rods with my motor soon once i get some money
keep us posted for more track times
congrats man
i might have to go with the vitara pistons and eagle rods with my motor soon once i get some money
keep us posted for more track times
06-06-2005, 08:15 AM
#13
Join Date: Jan 2004
Location: us
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BlackCRX)
Non vtec! Im a b series junkie, but now im on your dick....haha! Very nice work.Let see thoes high 11s low 12s. My buddy is running a sohc so im definately gonna have to show him this!! Lets see that video and more info on your car/set-up 
Modified by jnbhonda at 5:30 PM 6/6/2005
Modified by jnbhonda at 5:30 PM 6/6/2005
06-06-2005, 08:30 AM
#14
Honda-Tech Member
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jnbhonda)
Nice job FJT! Heh... i'm finally boosted my vitara setup also. Z6 though... without vtec.. i'm lazy! Feels nice for daily on 10lbs... once i get around to it, i'll bump up the boost and actually wire up and tune vtec.
06-06-2005, 09:18 AM
#15
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Texas
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Re: Close to hitting 11's..My track times with the Vitara setup (clean90Si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean90Si »</TD></TR><TR><TD CLASS="quote">What management again? Didn't see it in your build thread.</TD></TR></TABLE>
Uberdata 1.66 on a P06 ECU
Uberdata 1.66 on a P06 ECU
06-06-2005, 04:11 PM
#22
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Texas
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2point2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2point2 »</TD></TR><TR><TD CLASS="quote">maybe i'm blind.. but what do you lay down on the dyno?</TD></TR></TABLE>
266whp and 240lb/ft
266whp and 240lb/ft
06-07-2005, 07:08 AM
#24
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Texas
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dr. D-Series)
06-07-2005, 08:01 AM
#25
Honda-Tech Member
Join Date: Feb 2003
Location: Margaritaville
Posts: 7,355
Likes: 0
Received 0 Likes
on
0 Posts
Re: Close to hitting 11's..My track times with the Vitara setup (fjt)
I checked you're setup in your sig, but I am curious about your drivetrain. Clutch, axels, tranny setup?