Can you tune with J&S safeguard?
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: KOP, PA, USA
Posts: 2,685
Likes: 0
Received 0 Likes
on
0 Posts
Can you tune with J&S safeguard?
I am just curious. After all the talks about this topic I am contemplating getting a J&S over a FJO wideband. Can you effectively tune your car with the J&S?
#2
Trial User
Join Date: Apr 2000
Location: Albany, NY, USA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can you tune with J&S safeguard? (DC2R714)
Yes you can. You do the old, "go leaner/advance timing, back it off when you get detonation" routine with no fears.
However, I think that you can also end up with an overly aggressive tune, since you're tuning your A/F ratio and timing to be just this side of detonation. Using a wideband 02 sensor will let you confirm the safety of the tune.
FYI: I tune with a J&S.
However, I think that you can also end up with an overly aggressive tune, since you're tuning your A/F ratio and timing to be just this side of detonation. Using a wideband 02 sensor will let you confirm the safety of the tune.
FYI: I tune with a J&S.
#4
New User
Join Date: Feb 2001
Location: san luis obispo, ca
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can you tune with J&S safeguard? (DC2R714)
Hehe I tuned with my J&S... and then I put a wideband on and realized I was running like 9.8:1 AF ratio. Wideband is a far better tuning tool, but J&S is certainly something useful to have while tuning.
Thread
Thread Starter
Forum
Replies
Last Post
phiberoptik
Forced Induction
17
08-29-2003 08:50 AM