Can someone help me ID this Intake Manifold?
01-20-2013, 05:05 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: Nov 2009
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Can someone help me ID this Intake Manifold?
This intake manifold came on a car I just purchased and I cant figure out what it is. It has no markings on it, but it doesnt look like a stock one because it is too clean.
Anyone know?
Anyone know?
01-20-2013, 05:20 PM
#4
Re: Can someone help me ID this Intake Manifold?
Its the Professional Products (Also sold by AEBS) intake manifold, like looks like its been bead blasted or stripped. This is not an e-bay brand of any kind, in fact, Professional products does quite well with a LOT of performance parts and are even sold through Summit, Edlebrock, Nickle's performance, and others. Its not a bad piece.
They do fine for what they are, there's nothing that special about them until you start to port them out or perform some other customizations to them.
On a side note however, I am going to give a short rant... (and this is in no way a personal reference to the original poster Needforspeed502.) People need to know what the hell they purchase or trade before they agree to it, and try and let the internet masses solve their problems. this is like the 8th thread in a week about someone buying ****,no understanding what they bought, then play gameshow host asking "what is this I purchased without using my brain?" or "ID this please". Damn it people, start investigating what the
you bought before picking it up. You have an entire digital library at your disposal. is it that hard to look? 
/
They do fine for what they are, there's nothing that special about them until you start to port them out or perform some other customizations to them.
On a side note however, I am going to give a short rant... (and this is in no way a personal reference to the original poster Needforspeed502.) People need to know what the hell they purchase or trade before they agree to it, and try and let the internet masses solve their problems. this is like the 8th thread in a week about someone buying ****,no understanding what they bought, then play gameshow host asking "what is this I purchased without using my brain?" or "ID this please". Damn it people, start investigating what the
you bought before picking it up. You have an entire digital library at your disposal. is it that hard to look? /
01-20-2013, 05:25 PM
#5
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: Nov 2009
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can someone help me ID this Intake Manifold?
Thanks guys!
Shodan, I agree with your post, however in this case I did try to look, just to no avail. The car this came off of was a former magazine cover car that I got for an incredible deal. I don't know much about it, except that it has well over 25k of parts on it, but I am trying to figure things out while taking it apart and bringing it back to its former glory. It set in a garage for the last 5 years untouched, but luckily is still in very good shape. I hope to make a thread for it soon.
Shodan, I agree with your post, however in this case I did try to look, just to no avail. The car this came off of was a former magazine cover car that I got for an incredible deal. I don't know much about it, except that it has well over 25k of parts on it, but I am trying to figure things out while taking it apart and bringing it back to its former glory. It set in a garage for the last 5 years untouched, but luckily is still in very good shape. I hope to make a thread for it soon.
01-20-2013, 05:26 PM
#6
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: Can someone help me ID this Intake Manifold?
it can't be stock because it's too clean? what the hell does that mean? they are both aluminum and both can get equally dirty....
Trending Topics
01-20-2013, 05:32 PM
#9
Re: Can someone help me ID this Intake Manifold?
Its the Professional Products (Also sold by AEBS) intake manifold, like looks like its been bead blasted or stripped. This is not an e-bay brand of any kind, in fact, Professional products does quite well with a LOT of performance parts and are even sold through Summit, Edlebrock, Nickle's performance, and others. Its not a bad piece.
They do fine for what they are, there's nothing that special about them until you start to port them out or perform some other customizations to them.
On a side note however, I am going to give a short rant... (and this is in no way a personal reference to the original poster Needforspeed502.) People need to know what the hell they purchase or trade before they agree to it, and try and let the internet masses solve their problems. this is like the 8th thread in a week about someone buying ****,no understanding what they bought, then play gameshow host asking "what is this I purchased without using my brain?" or "ID this please". Damn it people, start investigating what the you bought before picking it up. You have an entire digital library at your disposal. is it that hard to look?
/
They do fine for what they are, there's nothing that special about them until you start to port them out or perform some other customizations to them.
On a side note however, I am going to give a short rant... (and this is in no way a personal reference to the original poster Needforspeed502.) People need to know what the hell they purchase or trade before they agree to it, and try and let the internet masses solve their problems. this is like the 8th thread in a week about someone buying ****,no understanding what they bought, then play gameshow host asking "what is this I purchased without using my brain?" or "ID this please". Damn it people, start investigating what the
you bought before picking it up. You have an entire digital library at your disposal. is it that hard to look? /
01-20-2013, 05:35 PM
#10
Re: Can someone help me ID this Intake Manifold?
01-20-2013, 07:13 PM
#12
DO IT ON ALL FOURS
Re: Can someone help me ID this Intake Manifold?
01-21-2013, 07:41 AM
#14
Honda-Tech Member
Join Date: Jan 2008
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can someone help me ID this Intake Manifold?
Yeah, I saw these through aebs a long time ago. I thought it was supposed to be based off the itr or sk2 manifold. But I couldn't get over the george foreman "lean mean grillin machine" top of it.
Thread
Thread Starter
Forum
Replies
Last Post
DsMWookie
Forced Induction
21
08-27-2003 04:54 AM