graphic

in a matter of a few short weeks i will need to get this tuned

h22 built bottom end
t3/t4 h-3 compressor wheel w/ a .63a/r and a stage 3 exhaust wheel
aem ems
780 cc percision injectors

i want to run this turbo at about 18 psi

now i want facts.... not opinions like for example

"so and so is a great tuner IMO."


thanks

bxsi

Give us a call, we actually have a prelude with a similar setup as yours about to be tuned early next week. We're just finishing up the build and then its going to be dynoed on pump gas. We are shooting for around 400whp. H22 forged internals 9:1 CR , similar sized turbo as yours, also 780cc inj, and hondata. Depending on your motor setup you may hit the limit of pump gas even before 18psi. The link is in the sig.

PHiZ

https://honda-tech.com/zerothread?id=855635

-PHiZ