call me an idiot but these earl's fittings are kinda tough...
#1
New User
Thread Starter
Join Date: Apr 2001
Location: Long Beach, CA, USA
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
call me an idiot but these earl's fittings are kinda tough...
just got my oil return setup on friday and today i was sitting in front of the tv playin with it to see how it fits together. i bought the swivel-seal fittings and performo-flex line. i'm guessin you gotta take the red socket thing off, stick the line thru and then screw both onto the blue fitting. kinda tough to do it by hand tho...i'll seriously try this week w/ my tools.
#3
Honda-Tech Member
Re: call me an idiot but these earl's fittings are kinda tough... (vudoo666)
#4
Honda-Tech Member
Join Date: Jan 2000
Location: Kings Mountain, NC, USA
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: call me an idiot but these earl's fittings are kinda tough... (93LSivic)
I have no idea why I checked out the installation instructions on this... but I did, and #6 just caught me off guard! LOL!
6. Check the mark that you made on the hose in Step 2. If the hose has backed more than about 1/16" out of the socket as you assembled it, curse and return to Step 3.
#5
Re: call me an idiot but these earl's fittings are kinda tough... (The Mick)
Since I didnt have all the proper tools, like the vise, I drove down to Home Depo and used the demos they had set up there. I even used thier wrenches because I didnt have that big of a size and when I was working on it the guy working there gave me a dirty look. I did buy a wire cutter so I wouldnt feel so bad. God Im a free loader....lol
art
art
#6
Honda-Tech Member
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: call me an idiot but these earl's fittings are kinda tough... (Arturbo)
lmao!
omg that is too funny! you should have asked the guy to lend you a hand...lol
omg that is too funny! you should have asked the guy to lend you a hand...lol
Since I didnt have all the proper tools, like the vise, I drove down to Home Depo and used the demos they had set up there. I even used thier wrenches because I didnt have that big of a size and when I was working on it the guy at working there gave me a dirty look. I did buy a wire cutter so I wouldnt feel so bad. God Im a free loader....lolart
Trending Topics
#8
Re: call me an idiot but these earl's fittings are kinda tough... (vudoo666)
What consists of the "oil return setup"? I'd like to do a nice braided return line with nice looking fittings on the turbo.
Also, any suggested fittings for the feed line?
Thanks. Tom
Also, any suggested fittings for the feed line?
Thanks. Tom
#9
What is this crap?
Re: call me an idiot but these earl's fittings are kinda tough... (blowncivichb)
check out the oil return on this block featured in the golden eagle article on overboost. return goes right into block. sweet. looks like some plain hi temp oil hose?
http://www.overboost.com/pix.asp?ima...l/DSCN3045.jpg
[Modified by falconGSR, 5:50 PM 1/2/2002]
http://www.overboost.com/pix.asp?ima...l/DSCN3045.jpg
[Modified by falconGSR, 5:50 PM 1/2/2002]
#10
Honda-Tech Member
Join Date: Jan 2000
Location: TX, USA
Posts: 1,627
Likes: 0
Received 0 Likes
on
0 Posts
Re: call me an idiot but these earl's fittings are kinda tough... (falconGSR)
check out the oil return on this block featured in the golden eagle article on overboost. return goes right into block. sweet. looks like some plain hi temp oil hose?
http://www.overboost.com/pix.asp?ima...l/DSCN3045.jpg
[Modified by falconGSR, 5:50 PM 1/2/2002]
http://www.overboost.com/pix.asp?ima...l/DSCN3045.jpg
[Modified by falconGSR, 5:50 PM 1/2/2002]
#12
Honda-Tech Member
Join Date: May 2001
Location: Midwest
Posts: 5,698
Likes: 0
Received 0 Likes
on
0 Posts
Re: call me an idiot but these earl's fittings are kinda tough... (falconGSR)
thats a really minimal upturn, which could probly be eliminated by shortening the hose a little, no?
Thread
Thread Starter
Forum
Replies
Last Post
... oil return line -- converting from rubber hose / clamps to steel braided lines / aeroquip fittin
1.8T_EG
Forced Induction
10
10-09-2002 11:37 AM