Boosted Stock sleeve LS-V
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: Modesto, CA, United States
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Boosted Stock sleeve LS-V
Well, finally got it tuned at Church Automotive Test/Tune after driving it around for awhile.
Stock sleeve LS with vtec head
cp piston and crower billet rods
hondata s200
etc.....gt35r, full-race.....
430hp and 298.7torque at little over 1 bar
What do u guys think!!!
Thanks CAT!!
Stock sleeve LS with vtec head
cp piston and crower billet rods
hondata s200
etc.....gt35r, full-race.....
430hp and 298.7torque at little over 1 bar
What do u guys think!!!
Thanks CAT!!
#4
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: Modesto, CA, United States
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Stock head/valves supertech springs/retainers with 9:1 Cp's........unfortunately no vids. Looks too ghetto right now for pics. Gotta put some wheels on first then for sure pics will go up!!!
Trending Topics
#8
Re: (B16Civic93)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16Civic93 »</TD></TR><TR><TD CLASS="quote">good numbers ...post some engine pics</TD></TR></TABLE>
b/c this thread is worthless w/o it or a dyno chart
b/c this thread is worthless w/o it or a dyno chart
#10
Honda-Tech Member
Re: (95dc2teg)
good numbers! im running a similiar LS/VTEC setup with a GSR head and itr cams, ramhorn and GT3582R. im running the stock sleeves as well. so far im only running 10 psi at 366whp. 15 psi is looking good right about now
Thread
Thread Starter
Forum
Replies
Last Post
A.E Motoring
Forced Induction
43
10-22-2007 10:45 AM