trickeng

Stay on topic trouble maker!!!!

sgnlab

Bite me!!!

Dc4LsTeG

iTrader: (7)

Thanks. So its 295 plus shipping for everything? So their good up until 500HP? You have anyone making more then that on them? I might shoot you a pm

TheShodan

iTrader: (14)

I'm more of a Garrett person when it comes to using intercoolers, though they do cost a bit more than the Vibrant series, but they come as a second place. The mishimotos are not a bad bang for the buck considering their make up, but one must really use their larger ones just to get over the 450whp "hump", so I would reserve that as a 3rd choice.

bnetkillzone

Interested in how you're doing all this in cali, im wanted to boost my stock LS but also live in cali, how are you keeping it street legal/ pass smog?

Khnemu

iTrader: (1)

You don't, you pay for illegal smogs and hope a cop that knows his **** won't pull you over.

Dc4LsTeG

iTrader: (7)

Thanks again for the help ill be looking into those.

Actually no I dont pay for an illegal smog. This car does not have to take a smog test

Khnemu

iTrader: (1)

Just saying, the majority of us do. That live here.

bnetkillzone

Yah, just might have to do that

Lucky!

Dc4LsTeG

iTrader: (7)

So not Related, but finished this up today for my 01 civic ex

trickeng

They are guaranteed to 500, but I have customers who have been running in the 600's for years.

rich7777

Dc4LsTeG

iTrader: (7)

ok ill prob be sending you a pm soon to get some more info.

Thanks

mines13

Nice setup, I am running the 6000 series valves myself. Great choice on the wide band BTW, I run the same setup with my S300. With closed loop enabled.

Dc4LsTeG

iTrader: (7)

Thanks. Yea hopefully these 5000 series valves work great

Dc4LsTeG

iTrader: (7)

Got my head back

rich7777

Very nice indeed !!

What work has been done exactly?

trickeng

What the hell did they do to the bottom of your head? That is so WRONG!!! You don't deck a head with 60grit on a sander. I wouldn't even consider putting that on until it was properly decked.

rich7777

You know what you're right. I don't know if its the light or is the surface finish really like that ? You want close to a mirror like finish if possible...

Dc4LsTeG

iTrader: (7)

Thanks Rich.

Had hot tank, valve guides installed, performance valve job, backcut valves, combustion chambers cleaned up.

lol thats what i thought when i first saw it. It had been decked before then there was a couple small scratches just from sitting and he said he just touched it up. It is VERY smooth, ill ask him again if i end up going back there today

Dc4LsTeG

iTrader: (7)

Also almost forgot these came in today

rich7777

Nice i have one to

See what he says about the head The flash on your cam could be making it look a lot worse . Does it look the same with your eyes (actually looking at the head in front of you )?

Edit, Actually forget that, of course it will.

Dc4LsTeG

iTrader: (7)

Which one do you have? The cluster Bezel or the a pillar one?

Yea looks the same in person the light from my flash on the phone just shows it a little more. But as I said ill talk to him today and see but it is smooth

rich7777

The cluster one, i love mine.

Dc4LsTeG

iTrader: (7)

Yea I like that one. I dont like gauges on the a pillar but I didnt want to put them anywhere else, and I need at least 4 gauges