Blow-off valve flanges...
07-04-2004, 02:18 PM
#1
Thread Starter
Blow-off valve flanges...
This may be a stupid question, but are there any B.O.V.s that interchange with one another in relation to the flanges? I have an Apex'i dual-chamber, but I'd like to just put something else on the flange instead of having to weld on another flange.
I guess what I'm getting at is I am really lazy, but if I can just bolt it on, I'm in, but if I have to cut the welder on, I'm not...
I guess what I'm getting at is I am really lazy, but if I can just bolt it on, I'm in, but if I have to cut the welder on, I'm not...
07-04-2004, 02:23 PM
#2
Honda-Tech Member
iTrader: (6)
Join Date: Sep 2000
Location: Los Angeles, CA, USA
Posts: 12,369
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blow-off valve flanges... (mildly interesting)
Every BOV uses different flanges. The only BOVs I know that use the same flange are the Greddy and Vortech BOVs.
07-06-2004, 11:06 AM
#5
Honda-Tech Member
iTrader: (6)
Join Date: Sep 2000
Location: Los Angeles, CA, USA
Posts: 12,369
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blow-off valve flanges... (Casey)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Casey »</TD></TR><TR><TD CLASS="quote">whats needed to put a tial flange on a pipe? besides the obvious of same type of metal and welding. like what size hole needs to be drilled, etc</TD></TR></TABLE>
You weld the Tial BOV flange onto your charge piping and clamp the BOV on.
You weld the Tial BOV flange onto your charge piping and clamp the BOV on.
Thread
Thread Starter
Forum
Replies
Last Post
