Block drain plug for water feed on turbo..
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: NY
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
Block drain plug for water feed on turbo..
Quick questions, will it be ok to tap the plug say, 1/4 npt or maybe slightly bigger to use with a -6 stainless line, and use a npt-an fitting.
second, i want to do the same for the return on the thermo housing. I've seen people tap the very last nipple, but what do i do with the coolant line that ran to it from the top rad hose waterneck.
Here's a pic..
at least i think that's what was there.
TIA
Modified by kuja at 11:22 PM 2/12/2007
second, i want to do the same for the return on the thermo housing. I've seen people tap the very last nipple, but what do i do with the coolant line that ran to it from the top rad hose waterneck.
Here's a pic..
at least i think that's what was there.
TIA
Modified by kuja at 11:22 PM 2/12/2007
Thread
Thread Starter
Forum
Replies
Last Post