Blew turbo. Put car back to semi stock. Will I be alright running like this?
#1
Junior Member
Thread Starter
Join Date: Jun 2001
Location: San Diego, CA, USA
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Blew turbo. Put car back to semi stock. Will I be alright running like this?
My turbo is smoking after re installing. I need to get it rebuild. its saab t3. Anybody in San Diego that does this at a decent price?
I put the stock manifold and down pipe in. I left everything else in. I put a air filter before the intercooler N/A intercooled. Plugged the oilpan drain. I left the Turboedit chip in the ecu with the 450 cc injectors. Will I be fine running like this for a while?
I put the stock manifold and down pipe in. I left everything else in. I put a air filter before the intercooler N/A intercooled. Plugged the oilpan drain. I left the Turboedit chip in the ecu with the 450 cc injectors. Will I be fine running like this for a while?
#3
Junior Member
Thread Starter
Join Date: Jun 2001
Location: San Diego, CA, USA
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Slammd Sol)
!!!!
Kidding. I plugged the feed too at the end of the line. I just coiled up and tucked it in by the motor mount.
Any other TurboEdit or Uberdata experts out there? Will I be fine?
Kidding. I plugged the feed too at the end of the line. I just coiled up and tucked it in by the motor mount.
Any other TurboEdit or Uberdata experts out there? Will I be fine?
Thread
Thread Starter
Forum
Replies
Last Post
Smashback
Forced Induction
15
09-02-2002 09:46 PM