big power ef/ed chassis fuel line questions
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Western, KY, USA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
big power ef/ed chassis fuel line questions
I'm planning to run e85 on a hx35 single cam motor hoping for mid 400's out of it. Right now I have a single in-tank 255, precision 1000cc's, and stock fuel lines. I'm considering either a single in-take 450lph or adding a bosch 044 in-line with the existing 255 thats in there now and stepping up to some bosch 1600cc's. At what point will my stock lines become my limiting factor?
#3
Honda-Tech Member
Join Date: Mar 2001
Location: Hilo, Hawaii
Posts: 4,136
Likes: 0
Received 0 Likes
on
0 Posts
Re: big power ef/ed chassis fuel line questions
I made around 395whp on stock lines with a 255, then I upgraded to -8an lines with a single Bosch 044. Probably could have made more on the stock lines, but wanted some peace of mind so I upgraded.
#4
Honda-Tech Member
Join Date: Oct 2005
Location: greeley, co, usa
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
Re: big power ef/ed chassis fuel line questions
We have made a little over 700 with an intank and a Bosch 44 inline we had high base pressure and id1000s... You will be fine with 1600s and the setup you described.
Thread
Thread Starter
Forum
Replies
Last Post
Randysi
Honda CRX / EF Civic (1988 - 1991)
7
02-23-2016 11:22 AM
Boostfed86
Forced Induction
18
02-12-2009 05:37 PM