Dan_the_MaN

Its for a '97 Civic with a IHI Turbo. I was using an old eclipse BOV, but it just isn't working for me anymore. I am getting a ton of leakage, so I am redoing my whole setup. I was wondering what you guys suggest for a well built BOV that priced well. I was looking at the Turbonetics Rapter. Priced well and it included all the mounting flanges. I have also been looking at Greddy RS and HKS SSQV. Suggestions?

Thanks guys.

dunkd

ehh they are the same in my eyes - its just a matter of what noise you like best.

Turb0Tek

Tial BOV

C M S

What he^^ said

D-t

I forgot about this. But how much psi can a 1st gen DSM bov(metal) can hold uncrushed?

What about crushed?

I think this is what I am going to use for my setup, and seems to be the best bang for the buck. If I would have bought something pricier, nicer, and better I would have went with the HKS ssqv

Dan_the_MaN

Forgot to mention I'm trying to get everything for under $200, including the mounting flange. Right now I am interested in the Pro Street Brand X BOV. Very similar to Greddy RS. Anyone have any experience with it?

z6

ebay replicas hold up well

Dan_the_MaN

Do I need a new downpipe or can I just unweld my old BOV off and weld the new one on in its place?

integra3586

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dan_the_MaN &raquo;</TD></TR><TR><TD CLASS="quote">Do I need a new downpipe or can I just unweld my old BOV off and weld the new one on in its place?</TD></TR></TABLE>

bov on a downpipe? sumthins wrong

Dan_the_MaN

lol, i didn't mean downpipe. I was thinking that. The pipe where the BOV is located, obviously.

Makdaddynuge

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dan_the_MaN &raquo;</TD></TR><TR><TD CLASS="quote">Its for a '97 Civic with a IHI Turbo. I was using an old eclipse BOV, but it just isn't working for me anymore. I am getting a ton of leakage, so I am redoing my whole setup.
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dan_the_MaN &raquo;</TD></TR><TR><TD CLASS="quote">Do I need a new downpipe or can I just unweld my old BOV off and weld the new one on in its place?</TD></TR></TABLE>

Maybe thats why. BOV on downpipe?

paulzy

iTrader: (1)

best bang for the buck is turbosmart or turboXS....they have conversion adapters for the stock DSM flange for like an extra 10-15 bucks