b18c turbo build- need guidance
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: Bay Area, Ca, Usa
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
b18c turbo build- need guidance
This is going to be my first turbo build. My power goals is going to be around 400whp. Tell me what you think.
RS Sleeved GSR block bored to 84mm.
IP Spec pro rods (ive never heard of them but that's what the seller told me what they were)
CP 9.5 pistons.
Hondata S300
ID 1000
Precision sc44 with a nuekin ramhorn manifold.
Precision 600hp intercooler.
Current I have the turbo kit on a stock b16. The block is not assembled yet. Any suggestions would help.
RS Sleeved GSR block bored to 84mm.
IP Spec pro rods (ive never heard of them but that's what the seller told me what they were)
CP 9.5 pistons.
Hondata S300
ID 1000
Precision sc44 with a nuekin ramhorn manifold.
Precision 600hp intercooler.
Current I have the turbo kit on a stock b16. The block is not assembled yet. Any suggestions would help.
Thread
Thread Starter
Forum
Replies
Last Post
StreetRacnGsR
Forced Induction
1
05-19-2003 05:13 AM
Blown90hatcH
Forced Induction
16
07-07-2001 01:24 PM