lezzzzz

hi, i'm gonna make 2 turbo setup (1 on in my b16a2 and the other on a friend's d16z6) , we got different items like turbocharger (t25 from s13 for me and t3 ssauto for my friend), 440cc, walbro 255lh, chipped p28.
i'm looking for basemap for each of us to street use of the cars (low pressure setup with stock internals : 6-7 psi max) : i'm thinking about 0.9° for ignition ret, and 120% of fuel for turbo efficiency (using Crome).
can you help a French newbie who wants to learn?......

ps: we're looking for street and all day use, no drag car; also we're from France so : european 98 octan fuel.

thank you all.

lezzzzz

no one for helping a french guy?
if you don't know, in my country, turbos, swaps, and lil' engine mods like cold air are illegal, so that we're late about these mods...

Please help me, i'm waiting for any advice.

HiProfile

You might want to post over at pgmfi.org. Honestly your best bet is to find someone willing to ship a PLX M-300 or similar wideband o2 sensor over to France (split the cost), get a rough basemap, then tune the AFR's yourself.

I still have an uberdata file for a B16a w/t3 60trim and 450cc's IIRC, it should be very close as far as AFR's go. Ignition should be fine, as it was tuned for 93 octane. Don't have any d16z6 maps for a t25 though. By next month I'll have one for a d16z6 w/smaller T3 turbo. Post your email address and I'll send it.


BTW you also posted early in the day, us USA boostjunkies don't get out of bed until at least 6pm

93supercoupe

hes not too far off the mark, French def. have better work ethic.

Buy a PLX M-300 for like 300dollars and tune the cars urself.

Everytime u upgrade, u wil be able to make the modifications safely and fast.

jdmsiR20

http://www.xenocron.com/bins/

lezzzzz

HiProfile t25 is for b16 engine, d16 will fit a t3.
thanks a lot for your help: t_lezzzzz@hotmail.com

i dl some bins on xenocron but nothing really appropriate.

steveo2000em1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmsiR20 &raquo;</TD></TR><TR><TD CLASS="quote">http://www.xenocron.com/bins/</TD></TR></TABLE>