catfishracer4748

I have a jdm b16a sirII in a 91 crx si. I am building for a 200-250 shot nitrous. I am having darton mid sleeves installed and getting pistons\rods. My question is, are there any pistons or rods that stand above the rest as far as nitrous goes? Also I would like to get some cams that would work well for nitrous. Any recomendations? And with the cams what kind of tuning is nessasary.

Thanks in advance for any help!

DC-2uned

For high HP turbo or nitrous applications, carillos are great or manley turbo tuffs are also a really good choice. Both brands have been tested to 800+whp, should be more then enough for what your doing, especially on a 1.6 liter, I hope you'll atleast bore the sleeves to 84mm to get a 1.7.

catfishracer4748

I'm assuming carillo and manley would be a good choice for the rods. But what about pistons? So do you think boring it to 84mm will leave enough cylinder wall thickness for up to a 250 shot of nitrous? What is a good option for tuning a 1.7 with cams?

catfishracer4748

Darton mid sleeves, Manley turbo tuffs, cp pistons, 5 point main girdle, arp studed top and bottom, acl race bearings, Exedy stage 4 clutch and flywheel, 600 hp Raxels, Cometic head gasket, port matched dc header, electric exhaust cutout, 4.75 final drive, mt slicks, port Polish ,5 angle valve job, cams. aem hybrid intake, gates racing iming belt, adj. cam gears, zex direct port 200 shot, 50 shot wet 2 stage proggressive msd 2step dual retard.

Damn thats just sick!