hotimportcrx

ok i have a b16 turbo that is obd 0 with a pw0 ecu and i need to get it tuned but idk with what.....i dont think turboedit works with pw0's and bre is a beta and no ones gonna know how to work it...besides converting to obd 1 what are my options???????????

lodo1

if your gonna be doing it yourself, i would recommend bre. just do a little research on the pgmfi boards and you grasp the concept. its very similar to turboedit

Ls1 FD3s

Have fun! OBD0 sucks... Convert it over to Obd1 and use Hondata s200b...

0xenocron

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ls1 FD3s &raquo;</TD></TR><TR><TD CLASS="quote">Have fun! OBD0 sucks... </TD></TR></TABLE>

ok...there's a well informed, well thought out suggestion

there are plenty of people running obd0 b16s using a pm6 and turboedit right now. for the amount it would cost you to convert up to OBD1, you could pay someone to street tune you with a wideband and be done with it...

hotimportcrx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xenocron &raquo;</TD></TR><TR><TD CLASS="quote">

ok...there's a well informed, well thought out suggestion

there are plenty of people running obd0 b16s using a pm6 and turboedit right now. for the amount it would cost you to convert up to OBD1, you could pay someone to street tune you with a wideband and be done with it...</TD></TR></TABLE>

i dont know about anyone else but i seen some nice turboedit #'s since i been looking today ....so today i picked up a pm6 and now i need to find a tuner.....what do i need to bring my tuner..just turboedit and a socketed pm6 for my b16 turbo???

093turbo16

iTrader: (2)

I am using BRE on a PW0 ecu, it fired right up no problem. Ben is working on a boost code for it. The program doesn't have all the bells and whistles yet. But it works. and is simple.

hotimportcrx

did you tune it yourself?

093turbo16

iTrader: (2)

I haven't had the chance to tune it yet. But I did adjust the maps for nitrous. If you can get a hold of the boost code. IT is great. Ask J.Davis. This is on a customer's car.

vti2

Zdyne would be a good choice has far you know somebody that can tune it.

raene

I've also used BRE on a PR3 ECU before the revision. Worked quite nicely

0xenocron

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hotimportcrx &raquo;</TD></TR><TR><TD CLASS="quote">

i dont know about anyone else but i seen some nice turboedit #'s since i been looking today ....so today i picked up a pm6 and now i need to find a tuner.....what do i need to bring my tuner..just turboedit and a socketed pm6 for my b16 turbo???</TD></TR></TABLE>

I'm in NJ and have done quite a few TurboEdit cars.

Yes, just bring your car with socketed PM6 (running on a basemap) to your local tuner or dyno shop that can tune TE. They'll hook up a wideband and their equipment, tune you and send you off!

I may have to look into BRE though with the good words posted today by J. Davis and his customer

hotimportcrx

where in nj are you and how much do you charge to tune...because id rather have someone with turboedit expierence