Attn: 10:1 Piston Guys....
#6
Honda-Tech Member
Re: Attn: 10:1 Piston Guys.... (C-Redrum)
I will be boosting 16psi from a .60 Ar/60 trim t3/t4 with custom made 10:1 JE pistons on my ZC.
Combined with a staged alcohol/water injection (10+psi of boost), and my altitude of 5200 ft, I should have no worries of boosting this high on a 10:1 CR.
I basically hope to acheive 300hp with a 78mm bore ZC on pump gas for daily driving.
(then throw in some race gas, and then turn it up to 24psi!! for the track )
Combined with a staged alcohol/water injection (10+psi of boost), and my altitude of 5200 ft, I should have no worries of boosting this high on a 10:1 CR.
I basically hope to acheive 300hp with a 78mm bore ZC on pump gas for daily driving.
(then throw in some race gas, and then turn it up to 24psi!! for the track )
Thread
Thread Starter
Forum
Replies
Last Post