Anyone here have or know of a T3 setup on a DOHC B-series engine?
#1
Honda-Tech Member
Thread Starter
Anyone here have or know of a T3 setup on a DOHC B-series engine?
A friend of mine was going to sell his T3 (rebuilt, never used) to me for cheap. I originally thought he had a T3/T4...but it turns out it's only a T3.
I've been told by a few people that the T3 wouldn't be adaquete on my B18C1. Everyone tells me that the T3 would be good for SOHC setups, but not DOHC engines (doesn't push enough air).
Thoughts, comments, concerns welcomed.
I've been told by a few people that the T3 wouldn't be adaquete on my B18C1. Everyone tells me that the T3 would be good for SOHC setups, but not DOHC engines (doesn't push enough air).
Thoughts, comments, concerns welcomed.
#2
What is this crap?
Re: Anyone here have or know of a T3 setup on a DOHC B-series engine? (Todd C)
i dont think there is a t3 compressor trim that will flow very well for a b18c1...but i could be wrong..whats the trim on the compressor wheel? how aout the turbine side?
#3
Re: Anyone here have or know of a T3 setup on a DOHC B-series engine? (falconGSR)
I'm using a t-3 (from a saab) and it works great.It also worked perfect on my sohc when i had it.
The turbo is capable of 15+psi but i'm only going to be runing about 9psi.A t3t4 will flow more because of the larger compressor but i'm happy with what i have.
How much is he going to sell it for?
The turbo is capable of 15+psi but i'm only going to be runing about 9psi.A t3t4 will flow more because of the larger compressor but i'm happy with what i have.
How much is he going to sell it for?
#4
Re: Anyone here have or know of a T3 setup on a DOHC B-series engine? (falconGSR)
i dont think there is a t3 compressor trim that will flow very well for a b18c1...but i could be wrong..whats the trim on the compressor wheel? how aout the turbine side?
in your case:
a motor with more power needs a turbo that pushes more air..! hth
#5
Junior Member
Join Date: Apr 2001
Location: So., CA, USA
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone here have or know of a T3 setup on a DOHC B-series engine? (Todd C)
i have a T3 super 60 in my DOHC B-Series, and it kicks in quick. good power band.
[Modified by krazE, 12:43 AM 4/14/2002]
[Modified by krazE, 12:43 AM 4/14/2002]
Thread
Thread Starter
Forum
Replies
Last Post
TurboJesse
Forced Induction
6
03-24-2003 07:27 PM