Anyone have a .63 T3 on their D series????!!! OK turbo?
#4
Honda-Tech Member
Join Date: Mar 2001
Location: Tallahassee, fl, usa
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone have a .63 T3 on their D series????!!! OK turbo? (racinskittle)
.60 a/r compressor is fine. I have that with a 50 trim and it works like a champ!
#5
Honda-Tech Member
Re: Anyone have a .63 T3 on their D series????!!! OK turbo? (CivicSoul)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CivicSoul »</TD></TR><TR><TD CLASS="quote">.60 a/r compressor is fine. I have that with a 50 trim and it works like a champ!</TD></TR></TABLE>
He's not talking about compressor size
a .63 ar exhaust housing will have a fairly slow spool up, but also have a nice pull on the top end. For most setups it will start to spool around 3500-4000.
If your looking for under 300hp and would like the faster spool go with the .48.
He's not talking about compressor size
a .63 ar exhaust housing will have a fairly slow spool up, but also have a nice pull on the top end. For most setups it will start to spool around 3500-4000.
If your looking for under 300hp and would like the faster spool go with the .48.
#6
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: USA
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone have a .63 T3 on their D series????!!! OK turbo? (Bryson)
Alright, sounds good. Thanks for the replies. 4000 spool up wont be bad, and I do like all the power at the top. But Im lookin for more like 200whp though, just something that keeps building to redline.
Civicsoul. I thought I was gonna get the 60/48 which would have been good too, but it turns out it's even bigger,
thanks for the help everyone.
Civicsoul. I thought I was gonna get the 60/48 which would have been good too, but it turns out it's even bigger,
thanks for the help everyone.
Thread
Thread Starter
Forum
Replies
Last Post
dustinz_em1
Forced Induction
7
11-25-2007 05:41 AM
spoolin turbo s
Forced Induction
7
10-04-2007 10:37 AM