Anyone got a picture of their D series Rev Hard Manifold
#2
Re: Anyone got a picture of their D series Rev Hard Manifold (D-Man)
its not the best pic. Its kinda rusty, gotta repaint it. It craked down the middle and I got a new one to replace it under warranty, just havent put it on yet. http://www.g1teg.org/clubmembers/mem...cs/engine1.jpg
i dont know how to post it as a pic.. havent had time to look up the help for it. if anyone can tell me it would be appreciated. dean
i dont know how to post it as a pic.. havent had time to look up the help for it. if anyone can tell me it would be appreciated. dean
#4
Re: Anyone got a picture of their D series Rev Hard Manifold (Arturbo)
I didnt use the right paint and didnt realize till it was already on the car. its been on for 2 years..
#6
Re: Anyone got a picture of their D series Rev Hard Manifold (89turboteg)
My manifold was coated with the paint that they use on the compressor housings, but I dont know what kind of paint it is but it burned right off. But my manifold is 2 years also and it looks ok. I was wondering if any water got on it or something?
art
art
#7
Re: Anyone got a picture of their D series Rev Hard Manifold (Arturbo)
nope it was just a white primer. was supposed to be 1500 deg, but it didnt last without a top coat. i thought it was gloss white but it wasnt... what do u guys use to paint them? i had a manifold that I just sold for a 1.8 and it was jet hot coated silver and it looked lovely. dean
Trending Topics
#8
Member
Thread Starter
Join Date: Nov 2001
Location: Nowhere, USA, USA
Posts: 2,524
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone got a picture of their D series Rev Hard Manifold (89turboteg)
the Pic is close,but not what im looking for,i wanna see the SOHC D manifold? but thanks anyway!
#10
Honda-Tech Member
Re: Anyone got a picture of their D series Rev Hard Manifold (RioNinja)
Here is my drag manifold..they are similar to the revhard...its mated to my d16z6 sohc vtec.
liam
liam
#11
Member
Thread Starter
Join Date: Nov 2001
Location: Nowhere, USA, USA
Posts: 2,524
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone got a picture of their D series Rev Hard Manifold (liam821)
that's what i got liam821,thanks for the pic anyway,i see you got a tial wastegate on there,guess its bolt pattern is the same as a deltagate.
#12
Honda-Tech Member
Re: Anyone got a picture of their D series Rev Hard Manifold (D-Man)
yep..the tial has the same bolt pattern as the deltagate. I also have f-max piping and a revhard downpipe..its a mutt kit
liam
liam
#13
Re: Anyone got a picture of their D series Rev Hard Manifold (D-Man)
sa far as I know the same manifold will fit a SOHC. rev hard only makes one manifold for the 1.6 d series as far as I know. dean
#15
Re: Anyone got a picture of their D series Rev Hard Manifold (D-Man)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D-Man »</TD></TR><TR><TD CLASS="quote">Anyone else got a pic of a Rev Hard Manifold installed on a D?</TD></TR></TABLE>
Still havent found your answer after 2 yrs?
Still havent found your answer after 2 yrs?
#18
Honda-Tech Member
Join Date: Feb 2002
Location: SC61ville, Brooklyn, NY/TX, USA
Posts: 10,836
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone got a picture of their D series Rev Hard Manifold (Tein Man)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tein Man »</TD></TR><TR><TD CLASS="quote">ahahah .... 2 years later .... </TD></TR></TABLE>
lol oh gesss
lol oh gesss
#19
Honda-Tech Member
Join Date: Aug 2003
Location: Ottawa, Ontario, Canada
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone got a picture of their D series Rev Hard Manifold (FredoSP)
The first one looks kinda odd, but I'm sure it's functional, that's what counts in the end right? Nobody cares what your manifold looks like when you're ahead of that domestic guy that always talks big!
Andre
Andre
#22
Honda-Tech Member
Re: Anyone got a picture of their D series Rev Hard Manifold (Arturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">
Still havent found your answer after 2 yrs? </TD></TR></TABLE>
hahah
Still havent found your answer after 2 yrs? </TD></TR></TABLE>
hahah
Thread
Thread Starter
Forum
Replies
Last Post
germanegturbo
Florida (Sales)
1
05-21-2008 11:25 AM