spoolin turbo s

just like it says anyone do any before and after's or anything?

boostedcivicsir

i didnt think they were out long enough for anyone to get, me i cant use em. 1mm over valves.

SFWD 1934

I did. So did Geoff. Things are wicked . . . Should have good seat pressure on your valve springs though. I have a head with 1mm over that I used them on.

Jason

boostedcivicsir

all the huh bub about the oversized valves swayed me away from them. went with mazworx v1's. we shall see what next weekend holds with them.

Turbocivic94

Do u have CTR cams that u can compare Mazworx cams with?

I would like to see the comparison.

boostedcivicsir

gsr's sorry.

redboost10

when you get a chance, can you please give your opinion on the mazworx vs. the gsr cams, if you can?

boostedcivicsir

n.p. at all. as long as it survives the dyno he hee, my engine is tired.

redboost10

anyone know the website on the full-race cams. i dont see them on their website, unless im looking in the wrong places.

slow poke

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tgh99si &raquo;</TD></TR><TR><TD CLASS="quote">anyone know the website on the full-race cams. i dont see them on their website, unless im looking in the wrong places. </TD></TR></TABLE>

There not selling them right now. There going to be released with an entire head package. You need wicked springs as already stated.

redboost10

so whats all the talk about the oversized valves? the f-r cams cannot be used with oversized vlaves? or they have to be used with os valves?

boostedcivicsir

because of the high lift, and the needed higher seat pressure, stock or little overs are prone to float, and the valves can actually hit each other.

slow poke

They cant be used with anything because there are not on the market right now. Once they come out you will know. As already stated, they can be used with over sized valves on the proper setup.

redboost10

mazworx cams sound pretty badass.

redboost10

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivicsir &raquo;</TD></TR><TR><TD CLASS="quote">n.p. at all. as long as it survives the dyno he hee, my engine is tired.</TD></TR></TABLE>

how did the mazworx vs. gsr's turn out?

boostedcivicsir

friday........i hope. i need to get out of work at noon to get to joe's (tempest).

boostedcivicsir

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slow poke &raquo;</TD></TR><TR><TD CLASS="quote">They cant be used with anything because there are not on the market right now. Once they come out you will know. As already stated, they can be used with over sized valves on the proper setup.</TD></TR></TABLE>

they can be but arent recomended to be. james innes assured me that the v1's were fine with oversized valves.

redboost10

im very interested in the mazworx v1s, i got .5mm oversized valves and dual springs on both sides, but i will wait to see what you have to say about them boostedcivicsir.

boostedcivicsir

n.p. i hope i have good news he hee.

redboost10

if you dont mind, can you tell me what you made with the gsr's and the setup

redboost10

alright boostedcivicsir, any numbers yet?