Any reason why I shouldnt send my block here?
#1
Honda-Tech Member
Thread Starter
Any reason why I shouldnt send my block here?
This place appears to turn out some quality stuff. I have just about convinced myself to box the block up and ship it. I like the built in top ring it seems logical to me the you would get a good head gasket seal this way.
Any reason why not to use these guys?
http://www.customdesignperform....html
Thanks,
Any reason why not to use these guys?
http://www.customdesignperform....html
Thanks,
#3
Honda-Tech Member
Thread Starter
Re: Any reason why I shouldnt send my block here? (dcturbols)
I would ship to iceland if it meant it would be done right the first time.
I have pretty limited Honda knowledge at this point and am just trying to do everything the best way.
I have heard stories of sleeves walking or dropping and I want the best sleeving job I can get.
I have pretty limited Honda knowledge at this point and am just trying to do everything the best way.
I have heard stories of sleeves walking or dropping and I want the best sleeving job I can get.
#4
Junior Member
Join Date: Aug 2004
Location: Copperas Cove, TX
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any reason why I shouldnt send my block here? (dcturbols)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dcturbols »</TD></TR><TR><TD CLASS="quote">Yeah, they are in CT and you have tons of great engine builders in Texas.
Endyn
T1R</TD></TR></TABLE>
Endyn
T1R</TD></TR></TABLE>
#5
Junior Member
Join Date: Mar 2006
Location: Fairfax, VA, USA
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any reason why I shouldnt send my block here? (Dark_Teg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dark_Teg »</TD></TR><TR><TD CLASS="quote">I would ship to iceland if it meant it would be done right the first time.
I have pretty limited Honda knowledge at this point and am just trying to do everything the best way.
I have heard stories of sleeves walking or dropping and I want the best sleeving job I can get.</TD></TR></TABLE>
Endyn and Benson are both considered excellent engine builders, many claim one or the other is the best.
Endyn is in Ft. Worth
Benson is in CA
T1R is definately worth consideration though as well and I beleive he is in the Houston area
I have pretty limited Honda knowledge at this point and am just trying to do everything the best way.
I have heard stories of sleeves walking or dropping and I want the best sleeving job I can get.</TD></TR></TABLE>
Endyn and Benson are both considered excellent engine builders, many claim one or the other is the best.
Endyn is in Ft. Worth
Benson is in CA
T1R is definately worth consideration though as well and I beleive he is in the Houston area
Thread
Thread Starter
Forum
Replies
Last Post
wade
Forced Induction
62
01-23-2008 01:09 PM