Almost Done!!! A few Teaser Pics...(56k...you're fine)
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Location: United States
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
Almost Done!!! A few Teaser Pics...(56k...you're fine)
Well after years of research and having one or two set-ups that never made it on the cars they were supposed to I'm finally done...or damn close to it. I'm only shooting for 600 WHP. That's not too crazy anymore but this has been my dream and I'm finally able to make it come true. I couldn't be happier
Set-up:
Full-Race Stage 3 GT (GT35R .82 a/r)
84.5mm B18C5 Sleeved by Justice Race Engines
CP Pistons
Manley Rods
Manley Valves, Springs, Retainers
1000cc Injectors
FJO Driver Box
Edelbrock IM
Walbro 255
Walbro Inline fuel pump
Exedy Twin Disk
Quaife LSD
P28/Neptune
Here are some pics to hold you guys over until it's tuned...I cannot wait!
I'll post up the dyno sheet once it's tuned in the next few weeks...I'm so excited! My dream car is finally becoming a reality
Modified by JDM_EH2 at 4:14 PM 1/11/2007
Modified by JDM_EH2 at 4:16 PM 1/11/2007
Modified by JDM_EH2 at 8:40 PM 1/11/2007
Modified by JDM_EH2 at 8:46 PM 1/11/2007
Set-up:
Full-Race Stage 3 GT (GT35R .82 a/r)
84.5mm B18C5 Sleeved by Justice Race Engines
CP Pistons
Manley Rods
Manley Valves, Springs, Retainers
1000cc Injectors
FJO Driver Box
Edelbrock IM
Walbro 255
Walbro Inline fuel pump
Exedy Twin Disk
Quaife LSD
P28/Neptune
Here are some pics to hold you guys over until it's tuned...I cannot wait!
I'll post up the dyno sheet once it's tuned in the next few weeks...I'm so excited! My dream car is finally becoming a reality
Modified by JDM_EH2 at 4:14 PM 1/11/2007
Modified by JDM_EH2 at 4:16 PM 1/11/2007
Modified by JDM_EH2 at 8:40 PM 1/11/2007
Modified by JDM_EH2 at 8:46 PM 1/11/2007
#2
official honda whore
Join Date: Nov 2002
Location: not tellin you where, pa, usa
Posts: 8,454
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (JDM_EH2)
i liked the part where you said you were "only" shooting for 600whp lol
with that setup is should be no problem, but in all actuallity its pretty basic parts anymore that get you 600whp
good luck tuning and have fun
btw your car is what i am hoping mine will be like in the near future
jdm front+big turbo+full-race=teh sex
with that setup is should be no problem, but in all actuallity its pretty basic parts anymore that get you 600whp
good luck tuning and have fun
btw your car is what i am hoping mine will be like in the near future
jdm front+big turbo+full-race=teh sex
#4
Honda-Tech Member
Join Date: Jul 2004
Location: I'm everywhere Focker
Posts: 5,463
Likes: 0
Received 2 Likes
on
2 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (coptzer)
That's awesome man....I have been down that road as well. Big projects that run out of money/time/steam cost you time and you get behind. Been there and done that. Sat around building cars for other people while I drove stock **** around for the past two years.
That car of yours looks pretty good man...should post more pics
Cars gonna be fun man...can't wait to see it make the 600+
That car of yours looks pretty good man...should post more pics
Cars gonna be fun man...can't wait to see it make the 600+
#7
Honda-Tech Member
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (RC000E)
Nice stock sleeves.... How is that 84.5mm?
Those don't look like CP pistons either. I have never seen CP's cut like that.
Those don't look like CP pistons either. I have never seen CP's cut like that.
Trending Topics
#9
Honda-Tech Member
Join Date: Jan 2006
Location: Shifting through socal with 3 toes
Posts: 2,221
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (tepid1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 »</TD></TR><TR><TD CLASS="quote">Nice stock sleeves.... How is that 84.5mm?</TD></TR></TABLE>
Serious They look like stock sleeves and arias pistons! but i could be wrong!
Good parts that will get you 600whp..... Who built it?
Serious They look like stock sleeves and arias pistons! but i could be wrong!
Good parts that will get you 600whp..... Who built it?
#11
Honda-Tech Member
Join Date: Jun 2004
Location: Dont Steal My Car, Ct, USA
Posts: 2,852
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (crvtecrob)
those cant be stock sleeves, and if he says they are CP's, well thats all i need.
Thats going to be one Sick ITR!!
Thats going to be one Sick ITR!!
#12
Member
Join Date: Apr 2005
Location: MN, United States
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (JDM_EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_EH2 »</TD></TR><TR><TD CLASS="quote">Well after years of research and having one or two set-ups that never made it on the cars they were supposed to I'm finally done...or damn close to it. I'm only shooting for 600 WHP. That's not too crazy anymore but this has been my dream and I'm finally able to make it come true. I couldn't be happier
Set-up:
Full-Race Stage 3 GT (GT35R .82 a/r)
84.5mm B18C5
CP Pistons
Manley Rods
Manley Valves, Springs, Retainers
1000cc Injectors
FJO Driver Box
Edelbrock IM
Walbro 255
Walbro Inline fuel pump
Exedy Twin Disk
Quaife LSD
P28/Neptune
!
</TD></TR></TABLE>
I like the "ONLY 600 WHEEL hp" in a vehicle that weights less than 2500 pounds depending on your chassis. Most of your f bodies wont be up that high. I'm also loving the supra turbo.
Not hating, its just funny to me.
to finishing your dream
imagine how hard its going to pull once you hook (if you ever do hook )
Set-up:
Full-Race Stage 3 GT (GT35R .82 a/r)
84.5mm B18C5
CP Pistons
Manley Rods
Manley Valves, Springs, Retainers
1000cc Injectors
FJO Driver Box
Edelbrock IM
Walbro 255
Walbro Inline fuel pump
Exedy Twin Disk
Quaife LSD
P28/Neptune
!
</TD></TR></TABLE>
I like the "ONLY 600 WHEEL hp" in a vehicle that weights less than 2500 pounds depending on your chassis. Most of your f bodies wont be up that high. I'm also loving the supra turbo.
Not hating, its just funny to me.
to finishing your dream
imagine how hard its going to pull once you hook (if you ever do hook )
#13
Honda-Tech Member
iTrader: (1)
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (Bjorn20)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bjorn20 »</TD></TR><TR><TD CLASS="quote">
I like the "ONLY 600 WHEEL hp" in a vehicle that weights less than 2500 pounds depending on your chassis. Most of your f bodies wont be up that high. I'm also loving the supra turbo.
Not hating, its just funny to me.
to finishing your dream
imagine how hard its going to pull once you hook (if you ever do hook )</TD></TR></TABLE>
he will hook.
but its the fact that with those sleeves he wont have room for mistakes, too thin too fragile.
I like the "ONLY 600 WHEEL hp" in a vehicle that weights less than 2500 pounds depending on your chassis. Most of your f bodies wont be up that high. I'm also loving the supra turbo.
Not hating, its just funny to me.
to finishing your dream
imagine how hard its going to pull once you hook (if you ever do hook )</TD></TR></TABLE>
he will hook.
but its the fact that with those sleeves he wont have room for mistakes, too thin too fragile.
#15
Member
Join Date: Jun 2004
Location: Seattle, WA, USA
Posts: 1,125
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (tepid1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 »</TD></TR><TR><TD CLASS="quote">Nice stock sleeves.... How is that 84.5mm?
Those don't look like CP pistons either. I have never seen CP's cut like that.</TD></TR></TABLE>
maybe he is running a b20 block bored a little? either way clean setup if those are stock sleeves good luck.
Those don't look like CP pistons either. I have never seen CP's cut like that.</TD></TR></TABLE>
maybe he is running a b20 block bored a little? either way clean setup if those are stock sleeves good luck.
#16
Honda-Tech Member
Join Date: Oct 2004
Location: All over ATL
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (AllmotorEH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllmotorEH2 »</TD></TR><TR><TD CLASS="quote">
maybe he is running a b20 block bored a little? either way clean setup if those are stock sleeves good luck.</TD></TR></TABLE>
Ummm he said he as a B18C5. Not a b20. READ!
I can't wait to get home and look at the pics. Work filters own me
maybe he is running a b20 block bored a little? either way clean setup if those are stock sleeves good luck.</TD></TR></TABLE>
Ummm he said he as a B18C5. Not a b20. READ!
I can't wait to get home and look at the pics. Work filters own me
#17
I want a CRX tattoed on my butt
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (blaze the chemi)
Sounds like your typical spend all your money HT build
Be proud you skimped out on the sleeves to, that WILL be this builds downfall
Be proud you skimped out on the sleeves to, that WILL be this builds downfall
#18
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Location: United States
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (PINKS)
Fixed. It was sleeved by Justice Race Engines, and built by Jeff Evans. He is also the tuner.
#19
Honda-Tech Member
Join Date: Jul 2004
Location: Carlisle, PA, united states
Posts: 1,557
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (JDM_EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_EH2 »</TD></TR><TR><TD CLASS="quote">84.5mm B18C5 Sleeved by Justice Race Engines
</TD></TR></TABLE>
He said it was sleeved. Doesn't say what sleeves or anything but it says its sleeved. They do look stock though IMO.
Nice setup and good luck with it. Be safe
</TD></TR></TABLE>
He said it was sleeved. Doesn't say what sleeves or anything but it says its sleeved. They do look stock though IMO.
Nice setup and good luck with it. Be safe
#23
Honda-Tech Member
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (rip94delsol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rip94delsol »</TD></TR><TR><TD CLASS="quote">what kind of sleeves are they?</TD></TR></TABLE>
STOCK!!!
Look at the casting. Notice how there is no seperation between the sleeves and there is molded aluminum surrounding the sleeve. THEY ARE STOCK!
And with the stock sleeves I bet it is 81.5mm w/ Arias pistons. Arias is known for their weird milling swirls on top of their pistons.
STOCK!!!
Look at the casting. Notice how there is no seperation between the sleeves and there is molded aluminum surrounding the sleeve. THEY ARE STOCK!
And with the stock sleeves I bet it is 81.5mm w/ Arias pistons. Arias is known for their weird milling swirls on top of their pistons.
#24
I want a CRX tattoed on my butt
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (tepid1)
Is this guy getting ripped off or is he lying about having this motor?
Those are definetely sotkc sleeves
My arias pistons had those swirls aswell
Those are definetely sotkc sleeves
My arias pistons had those swirls aswell
#25
Honda-Tech Member
Join Date: Jan 2006
Location: Shifting through socal with 3 toes
Posts: 2,221
Likes: 0
Received 0 Likes
on
0 Posts
Re: Almost Done!!! A few Teaser Pics...(56k...you're fine) (PINKS)
friend asked on my account! thats what i thought stock sleeves with arias! had the same set before!