Air research m10 turbo how to bolt?
02-24-2014, 04:04 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2014
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Air research m10 turbo how to bolt?
Hey guys trying to get my first turbo job underway. I am going to be boosting a d16z6. I pick up a cheap airesearch m10 turbo. The flange is for a chrysler is there anyway to make it fit a t3 flange? Do I need a new hotside? Any ideas? Is this turbo even usable? Any help would be greatly appreciated.
02-24-2014, 05:45 PM
#2
DO IT ON ALL FOURS
Re: Air research m10 turbo how to bolt?
There are many, many, MANY threads on this already. Here is one:
https://honda-tech.com/forums/showth...9285&styleid=2
https://honda-tech.com/forums/showth...9285&styleid=2
02-25-2014, 12:14 PM
#3
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: Air research m10 turbo how to bolt?
don't ask me why they had to modify a common flange... Chrysler did that to every turbo they used in an OEM application. don't know why
sometimes you can slot that one hole on the flange if there's enough material, if not I think there are a few adapter plates floating around eBay
sometimes you can slot that one hole on the flange if there's enough material, if not I think there are a few adapter plates floating around eBay
Thread
Thread Starter
Forum
Replies
Last Post