about to turbo my b16, got a few questions
07-11-2007, 03:42 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: florida, florida, florida
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
about to turbo my b16, got a few questions
i have a sir1 obd0 b16 converted to obd1 in my 92 eg vx.
everythings good with the car since the swap but i want a little more power.
i bought a turbo, cast manifold, ssqv bov, ic piping , some 390cc injectors and a 38mm wastegate. can i use these things to pull like 200 or 200 plus out of this b16, its basically a stock b16 with gsr cams and a port and polished head, gsr water pump and a greddy timing belt.
i have no idea what kinda turbo i have but its kinda smalish. please gime me some advise
everythings good with the car since the swap but i want a little more power.
i bought a turbo, cast manifold, ssqv bov, ic piping , some 390cc injectors and a 38mm wastegate. can i use these things to pull like 200 or 200 plus out of this b16, its basically a stock b16 with gsr cams and a port and polished head, gsr water pump and a greddy timing belt.
i have no idea what kinda turbo i have but its kinda smalish. please gime me some advise
07-15-2007, 11:55 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: florida, florida, florida
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: (numbnuts22715)
all is says is garrett on the charge side of the turbo, i will look again and see if there are anyother numbers or markings
Thread
Thread Starter
Forum
Replies
Last Post