98-01 US dc2 front end + fact fogs + FMIC
07-26-2009, 02:10 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: NYOB, where is mah gun, USA
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
98-01 US dc2 front end + fact fogs + FMIC
i was wondering if anyone had managed to pull this off (mounting a front mount intercooler on a 98-01 US dc2 front with the factor fog lights installed)
i know some of the civic guys have pulled it off but their fogs are located on the sides rather on the dc2s the fogs are located on the inside of the bumper.
car is a 99 gsr. FYI i dont have AC and i took out all of the lines and the condenser. i also have a half core radiator. any input or advice on the problem at hand would be appreciated.
and i did search with little to no luck, and all of the threads were way too old with dead pics.
any pics of the setup you are running (FMIC wise) would be greatly appreciated also.
thanks again
i know some of the civic guys have pulled it off but their fogs are located on the sides rather on the dc2s the fogs are located on the inside of the bumper.
car is a 99 gsr. FYI i dont have AC and i took out all of the lines and the condenser. i also have a half core radiator. any input or advice on the problem at hand would be appreciated.
and i did search with little to no luck, and all of the threads were way too old with dead pics.
any pics of the setup you are running (FMIC wise) would be greatly appreciated also.
thanks again
07-26-2009, 02:14 AM
#2
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: NYOB, where is mah gun, USA
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98-01 US dc2 front end + fact fogs + FMIC
i was wondering if anyone had managed to pull this off (mounting a front mount intercooler on a 98-01 US dc2 front with the factor fog lights installed)
i know some of the civic guys have pulled it off but their fogs are located on the sides rather on the dc2s the fogs are located on the inside of the bumper.
car is a 99 gsr. FYI i dont have AC and i took out all of the lines and the condenser. i also have a half core radiator. any input or advice on the problem at hand would be appreciated.
and i did search with little to no luck, and all of the threads were way too old with dead pics.
any pics of the setup you are running (FMIC wise) would be greatly appreciated also.
thanks again
i know some of the civic guys have pulled it off but their fogs are located on the sides rather on the dc2s the fogs are located on the inside of the bumper.
car is a 99 gsr. FYI i dont have AC and i took out all of the lines and the condenser. i also have a half core radiator. any input or advice on the problem at hand would be appreciated.
and i did search with little to no luck, and all of the threads were way too old with dead pics.
any pics of the setup you are running (FMIC wise) would be greatly appreciated also.
thanks again
07-26-2009, 01:26 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: NYOB, where is mah gun, USA
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98-01 US dc2 front end + fact fogs + FMIC
no bites? worst case scenario ill have to take the fogs off, but really would like to keep them...
07-26-2009, 07:34 PM
#5
Honda-Tech Member
Re: 98-01 US dc2 front end + fact fogs + FMIC
These are EK fogs but I was able to modify the bracket to make them fit. Obviously not factory position but they do look close.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbodailydan
Forced Induction
5
03-20-2010 08:04 PM
