94 Accord F22B1 Turbo build thread
#1
Honda-Tech Member
Thread Starter
94 Accord F22B1 Turbo build thread
Decided to make one of these considering I've been making up my turbo setup for a few weeks now. So far I've purchased an ECU, Turbonetics T3/T4 Turbo, intercooler, 2.5" charge piping, and an HKS SSQV 3 BOV.
I will also be buying a Tial 38mm wastegate, ebay boost controller, and ebay oil feed setup.
A little history of my motor. I installed a F23A1 intake manifold and a Phearable.net 68mm throttle body a few weeks go. It has been compression tested and proves sturdy. It has 220k on the motor but a rebuild (along with a full wire tuck, ABS delete, bay respray) will be performed this summer. I don't have enough time with school and work to perform a rebuild as this is my only vehicle. Here's the build thread to that: https://honda-tech.com/forums/honda-accord-1990-2002-2/94-accord-ex-build-thread-3121389/
Car itself as it sits N/A:
Manifold (Port matched):
Intercooler all bolted up, etc.
Piping with BOV:
Actual turbo being rebuilt currently, will post pictures when it gets back together:
I will also be buying a Tial 38mm wastegate, ebay boost controller, and ebay oil feed setup.
A little history of my motor. I installed a F23A1 intake manifold and a Phearable.net 68mm throttle body a few weeks go. It has been compression tested and proves sturdy. It has 220k on the motor but a rebuild (along with a full wire tuck, ABS delete, bay respray) will be performed this summer. I don't have enough time with school and work to perform a rebuild as this is my only vehicle. Here's the build thread to that: https://honda-tech.com/forums/honda-accord-1990-2002-2/94-accord-ex-build-thread-3121389/
Car itself as it sits N/A:
Manifold (Port matched):
Intercooler all bolted up, etc.
Piping with BOV:
Actual turbo being rebuilt currently, will post pictures when it gets back together:
Thread
Thread Starter
Forum
Replies
Last Post
s.cali alan
Classifieds: Forced Induction
3
05-03-2005 06:47 AM