94-95 integra gsr greddy turbo kit
#1
Thread Starter
Join Date: Sep 2003
Location: lebanon, pa, 17042
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
94-95 integra gsr greddy turbo kit
Ok I have a 94 civic cx with a jdm b18c. I recently ordered a greddy turbo kit and I have searched high and low and can't find a definaye answer. Can the FMU be rewired with a obd 1 plug, or do i need a new system like a hondata s200. Any help would be grateful. Also what would happen if i woudn't run a FMU? DRAG 3 and xs engineering do not come with any, or can i just run a vortech FMU?
vtec-power of dreams
vtec-power of dreams
#2
Honda-Tech Member
Join Date: Feb 2003
Location: Newcastle, DE, us
Posts: 1,946
Likes: 0
Received 0 Likes
on
0 Posts
Re: 94-95 integra gsr greddy turbo kit (eg6gsr)
I do not think it will work for you...I have a 92 h/b w/ a 94 ls motor w/a greddy turbo, and it would shut the car down completely in third gear while doing a full throttle pass...I winded up using 440s and a safc...After trying a fmu, blue box, e-manage, etc...I would reccomend using the vafc/ safc hack..Works very good..Get it dyno tuned though and u will not be dissapointed...My engine has 150k plus miles on it (all original and bone stock) pushing 10 psi through the greddy turbo and runs 12.5 @112 mph on bf street slicks.. for greddy.. for ls motors...(your motor is good to though )..
Thread
Thread Starter
Forum
Replies
Last Post
60-1
Forced Induction
11
11-05-2003 03:21 PM