9.7:1 cr turbo, dail driven? got lazy with the search!
#1
Thread Starter
Join Date: Jun 2004
Location: atlanta, ga
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
9.7:1 cr turbo, dail driven? got lazy with the search!
i did search, but i got lazy with it, and im not looking for a long explanation. i also know that tuning is the key. this is a darton sleeved gsr motor with 9.7:1 cps on eagle rods with cp rings, with all the other cool bolt ons and oooo ahhh stuff, tuned on aem ems. so for a very daily driven car with a/c and p/s and all the comforts would and about 15-17lbs daily be safe with that cr? and for the race tune i plan on just maxing out the turbo..... so with the right tune i should be ok right? thanks
Modified by turbodohcsi at 3:23 AM 6/6/2005
Modified by turbodohcsi at 3:23 AM 6/6/2005
#2
Honda-Tech Member
Join Date: Mar 2003
Location: Hudson, NH, 03051
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Re: 9.7:1 cr turbo, dail driven? got lazy with the search! (turbodohcsi)
Sounds like a good combo.Should be a good street setup.Shouldn't need much over 10 psi if the turbo's a descent size to make good street power.
Glenn
Glenn
#6
Member
Join Date: Oct 2002
Location: phoenix, hawaii
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Re: 9.7:1 cr turbo, dail driven? got lazy with the search! (scoop)
just a regular setup..nothing extreme at all why waste a post..i thought u said u know already?
Thread
Thread Starter
Forum
Replies
Last Post
dan_w_82
Forced Induction
6
01-06-2005 08:50 AM