EX-T

Just as the title says. Are RC 550s big enough to make over 350hp at the wheels?

GetawayInMoscow

They will work from 300-350ish. 350 will probably be pushing them!

urbansi

I was running 525's at 17psi making 360whp and according to Neptune they were only at 80% duty cycle.

integraRS-T

310cc 200~220whp
370cc 220~280whp
440cc 280~330whp
550cc 330whp~380whp
660cc 380whp~425whp
720cc 425whp~475whp
880cc 475whp~525whp
980cc 525whp~600whp hell yeah

Hotori Hanso

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integraRS-T &raquo;</TD></TR><TR><TD CLASS="quote">310cc 200~220whp
370cc 220~280whp
440cc 280~330whp
550cc 330whp~380whp
660cc 380whp~425whp
720cc 425whp~475whp
880cc 475whp~525whp
980cc 525whp~600whp hell yeah </TD></TR></TABLE>

where did you get this information? can anyone confirm its accuracy?

quik sol

Why not ask the guy tuning your car?....

EX-T

bumpity bump bump

Boostfed

Yes you can use 550cc for 350whp, I had 550cc and made 370whp waaay back in the day, I think they were close to being maxed out and we may have addded fuel pressure to compensate

quik sol

just go with 750's and call it a day, plenty of improving/breathing room.

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quik sol &raquo;</TD></TR><TR><TD CLASS="quote">just go with 750's and call it a day, plenty of improving/breathing room.</TD></TR></TABLE>

Damnit you beat me to the punch, I was gonna edit my post with the same info.


Too often people order injectors and also turbos and basically want to max them out, you gotta realize you will want more later OR at least most people do. So why go with something you will max out now and have to change out later and then lose money on the old injectors cuz now they are used. Go one step bigger on everything that way you can grow into it, that is my .02 cents though

EX-T

I'm not worried about losing money b/c I got the 550s for a really good price. Once I see how everything runs I might go ahead a buy some 750s....

*Boostwerks*

I find it funny how people are basing this off of HP numbers. What you should really be looking at is peak torque.

550's are just fine for my B16 @ 340whp, but on a 2.0L GSR @ 340whp it would be a different story.

I agree on the 750s (or 880s) though

EARLdaSQUIRREL

if you decided to get rid of the 550's i would just jump to 1,000's

GetawayInMoscow

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coptzer &raquo;</TD></TR><TR><TD CLASS="quote">if you decided to get rid of the 550's i would just jump to 1,000's </TD></TR></TABLE>

I agree with this actually...

0mtber

iTrader: (2)

Running out of fuel while tuning simply sucks for both the tuner & the customer.

TunerToys

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hotori Hanso &raquo;</TD></TR><TR><TD CLASS="quote">

where did you get this information? can anyone confirm its accuracy? </TD></TR></TABLE>

It's what we've been posting up for a few years now, when someone asks this question. We use those values as a basic guideline for our customers who buy our injectors. There is plenty of margin built into these values. Here is the full listing...

Flow Rate vs. HP Level
(Flow Rate for each injector,
in a four cylinder setup.)

310cc 200~220whp
370cc 220~280whp
440cc 280~330whp
550cc 330whp~380whp
660cc 380whp~425whp
720cc 425whp~475whp
880cc 475whp~525whp
980cc 525whp~600whp

Thanks from Craig

quik sol

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

Damnit you beat me to the punch, I was gonna edit my post with the same info.


Too often people order injectors and also turbos and basically want to max them out, you gotta realize you will want more later OR at least most people do. So why go with something you will max out now and have to change out later and then lose money on the old injectors cuz now they are used. Go one step bigger on everything that way you can grow into it, that is my .02 cents though</TD></TR></TABLE>

exactly....

Also, I recommended 750cc just because they are the highest RC that is saturated that I know of.

street dream gsr

i run 550s making 373whp. im still running them but MAY have to upgrade. i have to put it back on the dyno. i wouldnt be able to tell you until then.

PrecisionH23a

Always go with a larger injector.... they give you room to grow and keep your duty cycles down.

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrecisionH23a &raquo;</TD></TR><TR><TD CLASS="quote">Always go with a larger injector.... they give you room to grow and keep your duty cycles down.</TD></TR></TABLE>


Didn't we already say that? It has been said several times on this post and throughout the history of Honda Tech

EARLdaSQUIRREL

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">


Didn't we already say that? It has been said several times on this post and throughout the history of Honda Tech </TD></TR></TABLE>

injectors are actually something that you want to go big on if you ever decide to upgrade in the future, alot of people criticize honda people for running way to large of a turbo for the power etc etc whereas the injectors are always good to go bigger on as long as you have a good tuner who can get them to idle well

PrecisionH23a

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">


Didn't we already say that? It has been said several times on this post and throughout the history of Honda Tech </TD></TR></TABLE>

I repeated it just for you because of the conversation we had a day ago, lol. By the way... 2.25" downpipe FTW!

methos713

some good info here

EX-T

Bump for a subscribible(sp?) thread!

95jdmferio

how many psi can u get out of 550 do you think