400 hp on stock rods in a B series?
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Plano, Texas, United States
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
400 hp on stock rods in a B series?
I was wondering if anyone has done or know anyone that has been able to run 400 hp on stock rods? I know people say you need to get forged rods and pistons if you want over 300 hp safely but most of the time I see the piston get damaged I have heard of cases of rods bending and some snapping but not usually at around 400hp.
So..basically what I want to know is..if anyone has done or know anyone that has could they provide input? Now I know what you SHOULD do so dont come here and tell me that please, I want to know about those who have tried it and their experience....
So..basically what I want to know is..if anyone has done or know anyone that has could they provide input? Now I know what you SHOULD do so dont come here and tell me that please, I want to know about those who have tried it and their experience....
#2
Honda-Tech Member
iTrader: (2)
Join Date: Jan 2004
Location: DFW
Posts: 2,434
Likes: 0
Received 0 Likes
on
0 Posts
Re: 400 hp on stock rods in a B series? (TehGhett0P1mp)
many have made over 400 on stock rods. Not the safest thing to do, but you never know how long it will hold together
Here is one in texas:
https://honda-tech.com/zerothread?id=2135669
Here is one in texas:
https://honda-tech.com/zerothread?id=2135669
#3
Honda-Tech Member
Join Date: Nov 2007
Location: fort worth, tx
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
Re: 400 hp on stock rods in a B series? (red_crx)
there's a thread somewhere on here that is called most horsepower on a stock bottom end. It list most Honda motors with all STOCK bottom ends that have made big hp. I think the highest ls/vtec and b16 are in the 600s. Its pretty interesting to see. I never thought it was possible till I found that thread. Just try searching it
Thread
Thread Starter
Forum
Replies
Last Post